20m High Mast Lighting with 1000W HPS Lamps

FEATURES
15m, 18m, 20m, 25m, 30m, 35m high mast lighting pole
WE ARE MANUFACTURER SINCE 2000
Experience:
Our company was set up in 2000, having over 14 years of production experience in galvanized street light poles.
Production Capacity:
We manufacture galvanized street light poles from 3M-35M at the capacity of 20,000 poles per month.
Production lines:
For galvanized street lighting poles we carry on vertical production to get good control of quality and cost
PAKAGAING
Bulb wrappings for street lighting poles for FCL goods, felt wrapping first and then bulb wrappings for LCL street light poles.
SPECIFICATION
Material:High-quality steel Q235/SS400 from BAOSTEEL GroupWelding Technique:Automatic submerged arc weldingSurface Treatment:Hot dip galvanizing and powder paintingWelding Standard:GB11345 Grade IIThickness of Zinc Coating :≥ 86umAdhesive Force of Zinc Coating:GB2694-88Anti-wind Capacity:36.9m/sAnti-corrosion Lifetime:≥20 yearsCoating Layer Thickness :≥100umAdhesive force :GB9286-880 Hardness ≥2HSteel Pole Height Options:3.5m~15mStreet Lighting Poles Type Options:Conical, polygonal
Specifications
Height
From 18 m to 50m
Suit for
Airport ,seaport, plaza, stadium, square, highway station, street way ,etc
Shape
Round, Multi-pyramidal, Column form, polygonal or conical
Material
Q345B/A572,minimum yield strength>=345n/mm2
Q235B/A36,minimum yield strength>=235n/mm2
Torrance of dimension
+- 2%
Lighting Source
400 W- 5000 W high pressure sodium flood light, light extension :up to 30 000 m²
Light plate
Various figure of selection ,material with hot dip galvanization steel frame
Lifting system
Lifter fixed in the inner of the pole with lifting speed of 3~5 meter per minute
Equipped e; ant ferromagnetism brake and break -proof device, manual operation applied under power cut
Electric appliance control device
Electric appliance box to be the hold of the pole ,lifting operation could be 5 meter away from the pole through wire .Time control and light control could be equipped to realize full-load lighting mode and part lighting mode
Surface treatment
Hot dip galvanized Following ASTM A 123, color polyester power or any other standard by client required.
Joint of Poles
Insert mode, inner flange mode, face to face joint mode .
Design of pole
Against earthquake of 8 grade
Wind Speed
80 Km/Hour
Welding
We has past flaw testing. Internal and external double welding makes the welding in shape
Thickness
6 mm to 20 mm
Production Process
Raw material test→Cutting→Molding or bending →Welding (longitudinal ) →Dimension verify→Flangewelding→Hole drilling →Calibration →Deburr →Galvanization or powder coating, Painting→Recalibration→Thread→Packaging
Packages
Our poles as normal cover by Mat or straw bale at the top and bottom ,anyway also can following by client requiredDelivery Time
Generally 20 working days for 100 sets galvanized steel light poles.
We have plate cutting line--plate bending line-- auto. welding line--polishing line--spray painting line--packaging line