It is a kind of pilot steam 2/2 way valve. It can work under 180 ºC, mainly used for controlling the steams, that's why called the steam solenoid valve. The thread size is from 3/8" to 2". The working pressure for this solenoid valve is high, which can reach 1.5 MPa. The orifice sizes for this valve is also bigger than normal valve for same thread sizes to make the flow rate bigger. With its steady performance, this type of solenoid valve is widely used in the steam control systems in different industries.
Characteristic:
Type: Nomal close
Joint size: 3/8" 1/2" 3/4" 1" 1-1/4" 1-1/2" 2"
Flow Ratea: 17mm 22mm 30mm 50mm
Pressure: 1~1.5Mpa
Temperature: -5~185 centigrade
Material: Brass Bronze
Seal Material: PTFEModelUS-10US-15US-20US-25US-35US-40US-50
Working MediumAir, Water, Steam
Motion PattemGuid Type
TypeNormal Close Type
Aperture of Flow Ratea MM17223050
Cv Value4.8122048
Joint Pipe Bore3/8"1/2"3/4"1"1-1/4"1-1/2"2"
Operation Fluid Viscosity20 CST (Below)
Working-pressure1~15kgf/cm2
Max. Pressure Resistance22.5kgf/cm2
Operating Temperature Range-5~180
Voltage Range±10%
Material of BodyBrass
Material of Oil SealPTFE