3 Stage High Pressure Gas Pump Inflator

FeaturesStructure3StageHighPressureHandPumpLength630mmclosed,1070mmopenMaxPressure310Bar4500psior30MpaOutputNutM10*1Connector8MMN.W2.8kgG.W3.0KGPackage5pcs/cartonCartonSize0.65*0.18*0.33=0.038CMBG.WofCarton15kg/CartonOEMorderYes
-Maximum 300 bar fill pressure.-Built-in moisture trap embedded in the right handle which traps the moisture and protects your pump & air rifle.-Built-in particle filter embedded in the right handle which traps the dust & dirt and protects your pump & air rifle.-Ergonomically designed handle with synthetic cover.-Additional compartment in the left handle where you can put spare parts and O-rings of the pump or small belongings.-Comes with hose and connector.-Built-in precise pressure gauge embedded in the frame which protects it from external impacts.
-Easily demountable design.-The most convenient and affordable way to charge your PCP air gun.
Why is the hand pump theBESTway to fill a PCP?
In a word - control! You can stop at exactly the spot in the pressure curve your airgun likes. With a scuba tank, it's hard to stop at exactly the right point because the pressure rises so fast. Also, once a scuba tank or carbon fiber tank starts dropping in pressure, you cannot put more into a gun than is available in the tank. With a 3000 psi 80-cubic-foot tank, a pretty common size for a scuba tank, that happens pretty quick. When it does, you're stuck putting in less than a full fill for a great number of fills. Toward the end, you're only putting in enough air for a handful of shots before it's time to fill again. Not so with the pump, because you can go to the right stopping pressure each and every time.