30 Day Delivery Automatic Ultrasonic Disposable Surgical Face Mask Making Machine

Product Description

30 Day Delivery Automatic Ultrasonic Disposable Surgical Face Mask Making Machine

Automatic mask producing line is mainly used for automatic forming of flat masks.After the entire roll of fabric is unrolled, it is driven by rollers,and the fabric is automatically folded and wrapped.Nose bridge rolls unrolled by traction.Cut and import into the hemmed fabric,both sides are welded to seal by ultrasonic welding,and then through the ultrasonic side seal.It is cut and shaped by a cutter ; transported to the two mask ear band welding stations through an assembly line.The final mask is formed by ultrasonic welding. After the mask is made, it is transported to flat belt line and collected.

Place of OriginChinaBrand NameCHONGHONGProduct NameFace Mask MachineDimension(mm)6800(L)x3600(W)x1900(H)Weight≤2100kg, ground load bearing>300kgMask specification175*95mmProduction efficiency100-120PCS/minQualification rate98-99%Failure rate2%Working powerRated power about 6.5-8.5KWWorking Voltage220VAC ± 5%, 50zCompressed air0.5 ~ 0.7MPa, the use flow rate is about 300L / minOperating environmentTemperature 10 ~ 35 ℃, humidity 5-35% HR, no flammable and corrosive gas, no dust (cleanness not less than 100,000).ApplicationDisposable Nonwoven Fabric ProductUsageFor cutting non-woven melt-blow cloth, bridge of nose steel wire covered plastic / pure steel wire / full plastic, ear belt and so on .PackagingCarton or as per customer's requirements

Product Advantage

Integrated intelligent operating system.Adopting aluminum alloy rack which is more light and solider.High production efficiency The daily output can reach 170000 pieces.Modular design Simple and safe operation.High stability Fully Automatically,once non woven raw material in unwinding part use up, the machine can automatically stop.Integrated intelligent operating system One operator can complete the entire production task.

Suitable material specifications

Item

Number of hanging shafts

Width (mm)

Coil outer diameter (mm)

Inner diameter of barrel (mm)

Weight

Non-woven
Melt-blow cloth

3

170~200

Φ600

Φ76.2

Max 15kg

Bridge of nose
Steel wire covered
plastic / pure steel wire / full plastic

1

3-7

Φ400

Φ76.2

Max 25kg

Ear belt

2 bags

160*3

-

-

10N

Company Information

Chonghong supply a huge range of stainless steel wire rope,lifting, marine, rigging hardware and fittings. Under ISO 9001 standard and over 20 years of manufacturing, we are very sure that our best quality control, prompt delivery and after service will be fully satisfied with you.

Chonghong is specialized in producing, supplying, developing Anchors, Anchor Connectors, Marine Hardware Cleats, Hinges, Hold Down Clamps, Rigging Hardware like Snap Hooks, Quick links, Spring Snaps, Spring Hooks, Turnbuckles, Shackles, Snap Shackles, Wire Rope Thimbles, Wire Rope Clips, Wire Ropes, Swivels, Pulleys, Tri-glides, Belt Buckles, Swage Sleeves, Eye Bolts, Eye Nuts, Eye Plates, S Hooks, O Rings, D Rings, Triangle Rings, Brass Hardware, Chains,Gas Spring, Gas Spring accessories and so on.

Chonghong also has ability to make the customized products for you. You are welcome to send us your drawings or samples for tooling with us. We are very, very happy to deal with everybody with the same level of good old fashioned service.

Please feel free to contact us if you need any information or have any comment.