304/316/A2/A4 Stainless Steel Fully Threaded Rod, DIN 975/DIN976DIN 975 / 976 Bolts are Metric Threaded Stud Bolts.ApplicationThe DIN 976 stud was widely used in many industrial and manufacturing industries for fastening structural elements from wood, metal, as well as during construction and installation works. The most often used in the installation and engineering works.BenefitsSimplicity, ease and convenience of operation, it is enough to install the pin into the holes of the parts and tighten the nuts with the keys, which are installed on both sides of the fastening element.High quality and reliability of the connection, even if it is affected by vibration loads, completely eliminates the possibility of self-twisting, especially if special washers are used.Resistance to corrosive environments and corrosion, DIN 976 can be used to fasten metal structures in high humidity conditions.OperationThe stud is perfect for fixing metal and wood constructions between each other, the connection is of maximum strength and is highly resistant to mechanical and vibration loads.Most often this fastener element is used in assembly and construction works, as well as in industry and manufacturing industries.Specification
GradeSUS304/18-8/A2, SUS316/A4FinishPlainHead TypeHeadlessThread TypeUNCDiameterM3 ~ M42Length20mm ~ 1000mmStandardDIN 976, DIN 975StockAvailable(some sizes)
ContactIf you're insterested in our stainless steel metric threaded rod, please do not hesitate to send us an email or call us at+8615867456779(Mob)directly.For stock, we suggest you double check from us before placing order, thank you!