30dBm 85dB Repeater 3G 4G Lte GSM 900MHz Dcs 1800MHz WCDMA 2100 FDD2600 Utms Band Selective & In

30dBm 85dB Band Selective & Industrial signal booster with remote monitor and control repeaterBandselective & industrial repeater introduction
Band selective & industrial repeater are designed to use for specific operator or the user who have stringent requirements on out of band rejection and bandwidth and flatness and monitor of repeater,it has below characteristic:FeaturesUse the IF SAW filters ,the out of band rejection is very good and comply with ETSI,3GPP and 3GPP2 standards. The gain flatness≤3db if bandwidth <25Mhz and ≤5db if bandwidth>25Mhz.It can be local and remote monitored and controlled by our own software which is based on SQL data and server. local monitored and controlled by PC USB and remote monitored and controlled by SMS,GPRS or Ethernet. More parameters can be monitor by software,such as DL PA temperature, Input power, DL output power, DL actual Gain,DL VSWR, AGC Value, UL output power, UL actual gain and monitor Battery Voltage etc. It also have many alarms, such as power alarm, DL PA over temperature alarm,DL VSWR alarm and self-oscillation alarm etc. Also can set DL ATT ,UL ATT,PA power on/off by software.It has AGC function as below: 1) Automatically detect the isolation between donor antenna and service antennas,will automatically reduce the gain to avoid device self-oscillations. 2)Automatically detect output power,will automatically reduce the gain when the output power is too large.It has over temperature protection, it will off when temperature over 65ºC and will automatically open when temperature reduce to 15-50ºC.Limite the output power available for both uplink and downlink to avoid deep self-oscillations from jamming the towers, saving your trouble from operators.It has power light(WP,GP)and alarm light(WI,GI)for self-oscillations,the power light will display as below,for example 30dbm repeater: 1) power light always on when output power≥27dbm 2)Power light on for a longer time then off for a while when 20dbm≤output power<27dbm. 3)power light on and off interval when 13dbm≤output power<20dbm. 4)power light on for a while then off for a longer time when 8dbm≤output power<13dbm. 5)power light always off when output power<8dbm.Product specificationElectrical specificationUplinkDownlinkFrequency RangeCDMA450452.5~457.5MHz462.5~467.5MHzCDMA850 or LTE824~849MHz869~894MHzGSM900 or LTE890 ~ 915 MHz935 ~ 960 MHzEGSM900 or LTE880 ~ 915 MHz925 ~ 960 MHzDCS1800 or LTE1710 ~ 1785 MHz1805 ~ 1880 MHzPCS1800 or LTE1850 ~ 1910 MHz1930 ~ 1990 MHzWCDMA2100 or LTE1920 ~ 1980 MHz2110 ~ 2170 MHzAWS2100 or LTE1710 ~ 1755 MHz2110 ~ 2155 MHzLTE698~716MHz728~746MHz776~787MHz746~757MHz832~862MHz791~821MHz2500 ~ 2570 MHz2620 ~ 2690 MHzas developedIDEN800806MHz~821MHz85lMHz~866MHzTETRA380~385MHz(or customized)390~395MHz(or customized)Passband RippleGSM/DCS≤5dBWCDMA≤2dB/3.84MHzand ≤5dB/p-pMax .Gain≥75dB≥85dBMax .Output Power≥23dBm≥30dBmOut of Band Gain±600KHz≤ 40dB≤ 45dB±1MHz≤ 35dB≤ 40dB±2MHz≤ 30dB≤ 35dB±5KHz≤ 25dB≤ 25dBMGC(Step Attenuation)31dB / 1dB stepAutomatic Level Control ≥ 25dBNoise Figure≤ 6dBSpurious Emission9KHz~1GHz ≤ -36dBm ≤ -36dBm 1GHz~12.75GHz ≤ -30dBm ≤ -30dBm WCDMA System Spurious Emission MaskMeet 3GPP TS 25.143 ( V 6.2.0 )Modulation Accuracy≤ 12.5%Peak Code Domain Error≤ -35dB@Spreading Factor 256ACRR≥ 20dBc/30KHz @ ±5MHz≥ 30dBc/30KHz @ ±10MHzVSWR≤ 1.5IMD3≤-40dBcGroup Delay≤ 5μsFrequency stability≤ 0.01ppmMTBF100,000 HrsLED AlarmStandardPWRLEDGreen @ Normal work
No light@ Power SupplyissueWILED
GI LEDGreen @ Normal work
Red@ strong input signals or severe self oscillationWP LED
DP LED
GP LEDthe power light will displaythe actual output power of repeater.WP is for 2100MHz;DP is for 1800MHz and GP is for 1900MHz;Monitor and control SpecificationsStandardLocal monitor and controlPC by USB PortRemote monitor and control Remote access via wireless GSM SMS modem or GPRS Modem Mechanical SpecificationsStandardI /O PortN--FemaleImpedance 50 ohmOperating Temperature-25ºC~+55ºCEnvironment ConditionsIP65Dimensions465*320*215mmWeight≤ 16KGPower SupplyAC180~264VPower consumption ≤ 100Wrepeater actual test picture
24dbm EGSM900 band selective repeater
(Same repeater just shift the frequency by software)
24dbmDCS1800 band selective repeater
(Same repeater just shift the frequency by software)
24dbmWCDMA2100 industrial repeater
Monitor and control software introduction
DescriptionDifferent users can be assigned classified rights via different user name and password.The alarms and working parameters can be monitor and control by software.Support USB, SMS,GPRS or Ethernet communication.Support monitor and control over 500 pcs repeaters by one server.Support send a message to mobile phone when alarm occurs.Status of all repeaters interface: easily to find out which repeater does not work well.
Monitor Parameters interface, can find the actual working parameters of repeater
Alarm list interface: can set the alarms which you need. Also can send a message to your phone when have alarm