3ply face mask machine Full automatic face mask making machine

Full automatic face Full automatic face mask making machine

JWCKZ09a60

We have three different kinds of disposable mask printing machines. please check the details under below :

No1: Three layers flat design disposable mask printing machines

1:One is semi-automatic line which include 1 set mask body making machine and 5 sets manually elastic ear loop welding machine.

the machine speed about 60-70 pcs/min.

One machine need about 8 person.

2:The other one is Full automatic Full automatic face mask making machine , which include 1 set mask body making machine and 2 sets automatic ear loop welding machines.

The machine speed about 100 pieces/Min.

One machine need about 3 persons.

No 2: N95 Series Stereo mask equipment

Fully automatic line include Stereo mask main body making machine and automatic forming , elastic ear loop welding machine.

Speed : 40-50 pieces/min

No 3: HigHigh speed elastic ear band disposable mask equipment

Speed: 350-400 pieces/min

face mask

Complete line include 1 set mask body making machine and 2 sets ear loop automatic welding machine.

This machine is mainly used for the automatic making of flat masks: the whole roll of fabric is driven by rollers after unwinding, and the fabric is automatically folded and hemmed; Bridge of nose strip whole roll traction unroll,cut to length and guide into hemmed fabric. Two sides Ultrasonic welding to the seal, then ultrasonic 2 ends sealing, cutting and shaping by a cutter; conveying the mask to the two mask ear band welding stations through an assembly line, and finally forming the mask by ultrasonic welding; when the mask is made, it is transported to the flat belt line for collection.

Equipment installation and configuration requirements

Equipment size: about 6500mm (L) x 4500mm (W) x 1900mm (H);

Appearance color: rice yellow with profile;

Equipment weight: ≤5000kg, ground load ≤500KG / m2;

Working power: equipment 220VAC ± 5%, 50HZ, rated power about 9KW;

Compressed air: 0.5~0.7 MPa, using flow rate of about 300L / min;

Operating environment: temperature 10~35 ℃, humidity 5-35% HR, no flammable, corrosive gas, no dust (cleanness no less than 100,000 level).

Equipment production capacity:

Production efficiency: 80-100ppm;

Qualification rate of equipment production: 99% (when the incoming materials do not meet the requirements or the employees' improper operation are excluded)

Equipment failure rate: 2% (refers to the failure of the equipment itself)

Production specifications:

Standard type: 175 * 95mm

FACE MASK RAW MATERIALS:

raw material

style(gsm)

length (mm)

width(mm)

weight/piece

SS non woven(outer layer)

25

175

200

0.875

melt blown non woven(middle layer)

22

175

180

0.693

SS non woven(inner layer)

25

175

210

0.91875

nose wire

100

elastic ear loop belt

300