4: 1 Reciprocating Interproximal Stripping Contra Angle Handpiece

Name:Riprocating interproximal stripping contra angle & IPR package
Model: 1020CH(IPR)Parameters:
fits E type handpieces
1.4mm stroke
Autoclavable
Optimal torqueFeatures:
90μm-use as a saw for opening contacts
60μm-for reduction
40μm-for contouring
25μm-for finishing
15μm-for per polishing
Instruction:
1.Please notice that check product appearance if it is obviously deformative or attached foreign matters.
2.It must be kept in high temperature autoclavable sterilizer with 15 mins , and then dried for 30 mins.
3.put the stripper in coreect way with contra angle /manual grip .
4.the stripper will be placed on the interproximal teeth lightly stroke to cut and grind
5. in operation , if the stripper was broken or droped at ground, should replace a new one in time .
6.After operation , the stripper should be cleaned up completely and put in dry conditions.