4000PCS/Hour Full Automatic Blow Molding Machine

CE Approved PET Blow Moulding Machine (Manufactory) GY-BMM series are the most stable two-step fully-automatic pet stretch-blow moulding machines(preheat). It has two to eight cavities and the maximum capacity of the products is 2L. It can blow bottles in shapes: Carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers, which is made of plastic of crystalline type, such as PET and PP etc. * Controller system
The new microprocessor has more storage memory; It saves the operating setting up to 30 sets. Re-programmed software detects any possible errors permitting immediate identification and diagnosis of the problem. * Preform Feed
The preform stocked in the hopper are transported by conveyor and are sorted neck upwards for the feed ramp in to the perform oven automatically, the performs are now read to enter the oven equipped with its infra-lamps. * Linear transport oven
The heating of the performs is optimized by the new modular oven with 9 layers of heating lamps. It guarantees the ideal temperature for quality blowing. The preforms self rotated by frictional belts during the continuous movement. Due to the small gaps between the preforms, it requires less electric costs. We called as economic running. Spacing unit
Thanks to the spacing unit. It is the key to guarantee the flexibility in bottles sizes and ensures the possible of small pitch at the oven section.
General Information
GY-3500- 4-cavity
Clamping Force
40T
Clamping Stoke
125mm
Max.Stretching Stroke
400mm
Bottom Moving Stroke
0-50mm
Number of Cavities
4 Cavity
Theoretical Output
1500-2200 BPH
Max.Mould Thickness
300mm
Space Between Tie Bars
120mm
Mould plate size
640x650mm
Min air compressor
3.6m3/min 3.0Mpa
Min air compressor
1.6m3/min 1.0Mpa
Electrical System


Voltage Standard
380v/3PH/50Hz or special order
Number of Heating Zone
4 Sections
Total Power(Full Loaded)
60KW
Container
Container Volume
1.5L
Neck Diameter Range
16-38mm
Container Diameter
115mm
Container Height
360mm
Air system

Low Air compessor
8-10Bar
High Air compessor
30-40Bar
Net dimension & Weight(LxWxH)
Blow Molding Machine
220x200x200cm
Preform Autoloader
110x120x220cm
Net Weight
3.8T