48W AC DC Adapter Wall Mount Power Adapter Us/EU/UK/SAA Plug with UL cUL FCC Ce GS CB SAA and PSE

48W ac dc adapter wall mount power adapter US/EU/UK/SAA Plug with UL cUL FCC CE GS CB SAA and PSE
1. AC/DC Power Adapter Specification :
Model.:Output Voltage.:Output Current.:Watt (W)A361-0905000ID9.00V5.00A45.0WMKS-2402000ID24.0V2.00A48.0WMKS-1902200ID19.0V2.20A41.8WMKS-0903000ID9.00V3.00A27.0WMKS-1203000ID12.0V3.00A24.0WMKS-1204000ID12.0V4.00A48.0WMKS-1502000ID15.0V2.00A30.0WMKS-2401500ID24.0V1.50A36.0WMKS-3601000ID36.0V1.00A36.0W
2. SCOPEThe document detail the electrical, mechanical and environmental specifications of aSMPS,
the power supply provide48Wcontinuous output power.
The power supply shall meet the RoHS requirement.
2.1 Description :
SMPS Adaptor(Wall mount)3. Input Characteristics of 48W power adapter
3.1Input Voltage &Frequency:
The range of input voltage is from 90Vac to 264Vac single phase
Type.MinimumNominalMaximumInput Voltage.90Vac100Vac~240Vac264VacInput Frequency.47Hz60Hz/50Hz63Hz
For example:19VDC 2.2A adapter3.2.Input AC Current/AC:
1.5Amax. @100-240Vac input &Full load
3.3.Inrush Current (cold start):
80Amax.@ 264Vac input
3.4.Average Efficiency:
87.65%min.@ Nominal input
3.5.Energy Consumption :≤0.1W
4.Output Characteristics of 48W dc adapter
4.1Static Output Characteristics <Vo &R+N>OutputRated LoadOutput RangeR+NRemarkRateMin. LoadMax. Load+19V0.0A2.2A18.05V~19.95V190mVp-p
Ripple &Noise: Measurement is done by 20MHz bandwidth oscilloscope and the output paralleled a0.1uF ceramic
capacitor and a10uF electrolysis capacitor. (test under the condition of rated input and rated output)4.2Line/ Load Regulation:OutputLoad ConditionLine RegulationLoad RegulationRemarkRateMin. LoadMax. Load+19V0.0A2.2A+/-1%+/-5%4.3Turn -on Delay Time
3S max. @100Vac to 240Vac input &Full load4.4Hold-up Time
10mS min. @Full load &115Vac/60Hz input turn off at worst case
20mS min. @Full load &230Vac/50Hz input turn off at worst case4.5Rise Time
20mS max. @Rated load
4.6Fall Time
20mS max. @Full load
4.7Output Overshoot /Undershoot
10% max. When the power on or off
4.8Output Load Transient ResponseOutput voltage within18.05~19.95Vfor load step from 25% to 50% to 25%,50% to 75% to 50%
R/S: 0.25A/uS, Transient Response Recovery Time :200uS,Dynamic response overshoot 5%
5.Protection Requirements of 48W power adapter5.1 Over Current Protection:
The output shall hiccup when the over currents applied to the output rail, and shall be self-recovery
when the fault condition is removed5.2Short Circuit Protection:
The input power shall decrease when the output rail short, the power supply shall no damage,
and shall be self-recovery when the fault condition is removed6.Environment Requirements
6.1Operating Temperature and Relative Humidity:
0ºC to +40ºC
10%RH to 90%RH6.2Storage Temperature and Relative Humidity:
-20ºC to +80ºC
5%RH to 95%RH non-condensing @Sea level shall be low 2,000 meter6.3Vibration:
10 to 300Hz sweep at aconstant acceleration of 1.0G(Breadth: 3.5mm) for 1Hour for each of the
perpendicular axes X, Y, Z6.4Drop in:
1 Corner, 3Edges, 6Surfaces, Height: 100cm, On the Boards plane, the plug can be bend, and
scratch, but the structure should not be damaged, and can work normally7.Reliability Requirements
7.1Burn-in:
The power supply shall be burn-in for 4Hours under normal input and 80% rated load at 40ºC5ºC8.EMI/EMS Standards/EMI/EMS
7.1EMI Standards/EMI: EN55014
7.2EMS Standards/EMS:
7-2-1 EN 61000-4-2,electrostatic discharge(ESD) requirement
7-2-2 EN 61000-4-3,radiated electromagnetic field susceptibility(rs)
7-2-3 EN 61000-4-4,electric fast transients(burst) immunity requirement
7-2-4 EN 61000-4-5,surge capability requirement
7-2-5 EN 61000-4-6, Induced radio frequency fields conducted disturbances immunity requirement9.Safety Standards
9.1Dielectric Strength(Hi-pot):
Primary to Secondary: 3000Vac /10mAMax /60 second9.2Leakage Current:
0.25mAmax. at 264Vac /50Hz9.3Insulation Resistance:
50MΩ min. at primary to secondary add 500Vdc test voltage9.4RegulatoryStandards :Type.Country.Standard.State.Note.UL/cULUSA/CanadaUL60950PASSFCC-EMCUSA/CanadaPart15 Class BPASSCE/GS/CBEuropeEN61558PASSCE-EMCEuropeEN55014PASS
ISO9001:2008 system is fully implemented in our management. Our products have passed most of safety
approvals in the world, including UL, cUL, FCC, PSE, GS, CE, SAA, CCC, C-tick, CB, etc.
10.Match. Outline Drawing
Shell materia: 95ºC/ temperature resistance 95ºC
Remark:PC texture
11.Lable of ac dc power adapter :PS: Sure we can print your brand in the lable .
11.DC Wire of Adapter :
UL2464 20AWG L=1.5m or 1.8m
OEM&ODM12.about Merryking Factory:
Question :What is the main product of your company ?
Answer :1). AC DC Power Adapters2). USB Smart Charger3). PD and Fast Charger
13.Q &A:
Question :What certificates do you have ?
Answer :Our products have completely been approved UL,cUL,FCC,CCC,GS,CB,CE,TUV,SAA,KC,ROHS,PSE,etc. In order to make you fully understood the quality of our products,we would provide you with related certifications on your request.
Question :What`s your MOQ?
Answer :There is no MOQ and you are welcomed to order any amount.But you will get discount price for bulk order.
Question :Would you give me more details about the price of your products ?
Answer :We believe our quality and price are very competitive in worldwide market and We promise to offer you best cost-efficient products with higher quality.
Question :How can Iget the matched adaptor production with only requirements/description ?
Answer :Ok Dear client, We`ll introduce you the matched products
according to your descriptions. Please kindly CLICK HERE to describe your requirements with following necessary tips :
a. What's the input please? Example:100-240VAC, 50/60Hz2
b. What's the output, please? Example: 19VDC2.2A
c. What certificates do you need ?Example:UL+FCC needed
The more details you provide,the faster we could provide you with the corresponding products.
Question :I saw your company is with much experience in adapter field.Will Iget better products than Iexpected under your guidance/suggestions ?
Answer :We aim to support our dear clients ,to achieve Your successful business with products quality and competitive price ,as well as 3years warranty (longer warranty in this filed).
Also, we will offer you more necessary experience for free. For example,a.If your product working current is 1A ,we suggest you to use 19v 2.2A model ,so the adapter can keep good working status and long life ,and the working temperature is very low ,the 19v 2.2A adapter's price is nearby with 19v 2.2A .b. If your product belong to medical device ,the quality standard should be IEC 60601 ,if your product belong to IT device ,the quality should be IEC 60950.
Question :What payment term do you accept please ?
Answer :We accept T/T,L/C,D/P,Western Union paypal etc.
14.Contact Detial :Nikki Xiang
Sales EngineerCell Phone:+86-159-1408-5671www.merryking.com