5 Inch 720*1280 Resolution Customizable TFT LCD Module LCD Screen Touch Screen

1. Technology Specifications
1.1 FeaturesItemStandard ValueDisplay Type720(R+G+B) *1280 DotsLCD Typea-Si TFT, Positive, TransmissiveViewing DirectionALLBacklight12LED White ColorInterfaceMIPI
1.2 Mechanical SpecificationsItemStandard ValueUnitOutline Dimension64.64(L) x117.99(W) x1.5(T)mmActive Area62.10 (H) x 110.40(V)mmLuminance(TYP)Cd/m2Note:For detailed information please refer to LCM drawing
1.3 Absolute Maximum RatingsItemSymbolConditionMin.Max.UnitPower VoltageVDD--0.53.96VAVDD--0.512.0VVGH-0.321VVGL-80.3VOperating TemperatureTOP--20+70°CStorage Temperature.TST--30+80°CStorage HumidityHDTa < 40 °C-90%RHNote: The absolute maximum rating values of this product not allowed to be exceeded at any times.Should be module be used with any of absolute maximum ratings exceeded. The characteristics ofthe module may not be recovered, or in an extreme case, the module may be permanently destroyed.Interface Pin DescriptionNOSYMBOLI/OFUNCTIONRemark1VCOMPThe power supply of common voltage in DC com driving.2~3VDDPIPower for Digital Circuit4NC-NC5RESTIGlobal reset.6STBYBIStandby mode, Normally pulled high.7GNDGPower ground8RXIN0-INegative LVDS differential data inputs9RXIN0+IPositive LVDS differential data inputs10GNDGPower ground11RXIN1-INegative LVDS differential data inputs12RXIN1+IPositive LVDS differential data inputs13GNDGPower ground14RXIN2-INegative LVDS differential data inputs15RXIN2+IPositive LVDS differential data inputs16GNDGPower ground17RXCLKIN-INegative LVDS differential clock inputs18RXCLKIN+IPositive LVDS differential clock inputs19GNDGPower ground20RXIN3-INegative LVDS differential data inputs21RXIN3+IPositive LVDS differential data inputs22GNDGPower ground23~24NC-NC25GNDGPower ground26NC-NC27DIMOOBacklight dimmer signal for extermal controller.28SELB(1.8V)I6bit/8bit input select.
L: 8bit. H: 6bit.29AVDDPPower supply for analog circuits30GNDGPower ground31~32LED-PLED Cathode33L/R(1.8V)ISource Right or Left sequence control. Normally pull high.34U/D(NC)IGate drive Up/down scan setting.Normally pull low.35VGLPGate get off Power supply36~37GNDGPower ground38~39VGHPGate get on Power supply40LED+PLED Anode