500m Span Suspension Clamp (Two amour rods)

Suspension Clamp for ADSS Cable 500m Cable Span (Two Amour Rods)
Features:
ADSS two amour rod suspension sets are designed to reduce static stress ate the support point of ADSS cable,as well as ensure that the cable is cushionedvagainst the dynamic stress of Aeolian vibration.The combination of the reinforcing amour rods and dead-end amour rods provide against cable bending stress,there's no other stress concentration,so that the fiber optic doesn't produce extra loss in the cable.The grip strength of the clamp is bigger than 10%-20% of the rated tensile strength.Applications:
(1)The span should be 200-800m.
(2)The poles/towers with corner angle less than or equal to 30° straight lines
(3)The angle of single-side suspensions is between15°-18°
Warehouse:
Standard Configuration:
1.U-7 Anchor shackle
2.ZH-7 Eye chain link
3.AGS clamp Aluminum housing
4.Rubber insert
5.Dead end amour rods
6.Reinforcing rods
7.Other link fittings are customizedTechnical data sheet:
Breaking force:20kN,30kN,40kN,50kN,60kN,70kN,80kN,100kN
Recommended Span Length:200m,300m,400m,500m,600m,700m,800m,1000m
ModelCable Diameter(mm)Reinforcing Amour rod(mm)Dead-end Amour rod(mm)Breaking force(kN)Recommended Span LengthAXC-2009.5-21.31200900≥20kN200mAXC-3009.5-21.315001060≥30kN300mAXC-4009.5-21.316001100≥40kN400mAXC-5009.5-21.317601260≥50kN500mAXC-6009.5-21.319601360≥60kN600mAXC-7009.5-21.321001500≥70kN700mAXC-8009.5-21.322001580≥80kN800mAXC-10009.5-21.325901680≥100kN1000mShipment:
Installation Guide: