50m Wireless Kvm HDMI Transmitter (2.4G/5GHz with IR Repeater)

50m HDMI Wireless KVM HDMI Transmitter 2.4G/5GHZ with IR RepeaterThis HDMI/KVM Wireless extender uses 2.4G and 5G technology to enable high-speed, high performance wireless communication among consumer electronics, computer and mobile devices.
It combines high bandwidth capacity with strong error-correction , to deliver uncompressed HD video.
It can go through the wall, and transmit the signal up to 50m in the open area.Features:Support HDMI 1.4a Support HDCP1.3Support standard IEEE802.11a/b/g/nSupport resolution up to 1920x1080/60HzSupport the highest rate 1.485G and TMDS clock up to 148.5MhzSupport IR controlSupport KVM functionWork in 5G frequency band, it is not easy to be interfered by wireless signalsThe max transmitting distance can be 50m (In the open area)5V/1.5A power adaptorSpecifications:
HDMI Version ..............................................up to HDMI 1.4a
HDMI Resolution ......................…....….. .......….....up to 1920x1080/60Hz
Support audio format..............…. …. ..................................................Stereo audio
Max bandwidth............................................…...148.5MHz
Max baud rate.......................…........….................1.485Gbps
Input cable distance..…. ...…. .....…(1080p resolution) ≤8m AWG26 HDMI standard cable
Output cable distance.........…..…(1080p resolution) ≤8m AWG26 HDMI standard cable
Transmitter Max working current.........................................…....1.2 A
Receiver Max working current..............................….....….......800mA
Power adapter..................…..…...Input AC (50Hz, 60Hz) 100V-240V; Output: DC5V/1.5A
Operating Temperature range............…................... (-15ºC to +55ºC)
Dimension (L x W x H).........................…..................…136x86x23 (mm)
Product picture:Product interface picture:
Connection and Operation:
1. Connect the HD source to the input of the wireless extender TX with 1 HDMI cable
2. Connect the output of the wireless extender TX to the display device with 1 HDMI cable
3: Connect the output of the wireless extender RX to the display device with 1 HDMI cable
4: Connect 5V/1.5A power adapter to the TX and RX.After connecting well, there are two methods to send the control signal from the RX back to the TX.
Method 1: IR control function. 1) Connect the IR receiver to the "IR-RX" port on the wireless extender receiver; 2) Connect the IR transmitter to the "IR-TX" port on the wireless extender transmitter; 3) Put the IR transmitter port near to the HD source IR receiving hole. The method is usually used in DVDs. Method 2: KVM function. 1) Connect the keyboard and mouse to the USB ports on wireless extender RX; 2) Use a double male USB cable, one male USB port connects with the USB on the wireless extender TX, the other male USB port connects with the USB on the signal source. The method is usually used in computers.The Pair code matching :
The wireless extender transmitter and receiver have been matched well in the factory. If the users need to match again (ex: The matched well transmitter or receiver needs to match another receiver or transmitter)
Please follow the steps:
1) Transmitter: connect with the power supply for about 40 seconds, when the "wireless" indicator lights up, press the "Pair" button on the transmitter, "wireless" indicator will flash slowly.
2) Receiver: connect with the power supply for about 40 seconds, "wireless" indicator lights up, then press the "Pair" button on the receiver, "wireless" indicator flashes slowly.
3) When the "Wireless" indicators on the transmitter and receiver start to light up, the pair code is successful.Instruction:When the "Power" indicator lights up, it means the power is on.When the "Wireless" indicator lights long, it means the extender is running well. And the "Wireless" indicator on the transmitter flashes quickly means wireless signal is received and transmitted well.
Package include:Wireless extender TX and RXIR transmitter and receiver cable Power adapterUser manualAntenna