70kn - 100kn High Voltage Polymer Suspension Type Insulator
General Introduction
Insulator is the most widely used basic components in high voltage transmission and distribution power system, it is use for isolation of live part. Composite insulator is use epoxy rod and rubber sheds external insulation polymer composite insulators. Compare with traditional ceramic and glass insulators, it is more lighter(only about 1/4 to 1/8 of traditional insulator), higher strength(10 times higher than high-strength porcelain insulator), less clearing(anti-water). And it also overcome the short life problem of conventional polymer materials, the life will be several decades. It is the new product in power system.
This product is suitable for AC 220KV and below generation, transmission, substation and distribution system for the insulation of live parts.Working Conditions
1. Ambient Temperature: -40ºC to +40ºC
2. Altitude: do not exceed 1000m; (1000m and above can be amend base on GB311.1-1997)
3. Frequency: do not exceed 100Hz
4. Mechanical Load: do not exceed the rated value of each productTechnical SpecificationCode NoRated Voltage(KV)Specified MechanicalLoad(KN)Section LengthL(mm)Min Arc DistanceL1(mm)Leakage Distance(mm)Lightning ImpulseWithstand BIL(KV)Power FrequenceWithstand(wet) (KV)FXB-1212-1570/1003801694409545415FXB-2424-2870/10047526169018595496FXB-3533-3870/100563353900230105588
Product Details