Model No.: YB60Product introduction:
This self-priming pump only for pumping Diesel or Kerosene,do not pump low ignition oil like Gasoline, Liquefied Petroleum Gas or Alcohol as well as high viscous oil like Engine Oil.
Technical Parameters:
Model
JYB40
YB60
YB80
Flow Rate
(20-40)L/min
(20-60)L/min
(50-80)L/min
Rated Voltage
AC220V
AC 220V or 110V
AC 220V or 110V
Power
120W
375W
550W
Pressure
0.16-0.18Mpa; 1.6-1.8bar;
23-26psi
0.18-0.20Mpa; 1.8-2.0bar;
26-29psi;
Suction Lift
3m
3-5m
Head Lift
6m
5-10m
In-out
In BSPT3/4",
Out BSPT3/4"
In BSPT1", Out BSPT1"
Note:1. The filter must be cleaned regularly.
2. The pumping fuel's ignition should not exceed 55 ºC.
3. Do not empty spin.Relevant Products: