Pneumatic (linear motion) actuator model descriptions
Vertical cylinder (abbreviation of Vertical Cylinder); indicating the pneumatic piston actuator;
Letter S indicates single acting spring return, and no indication for single cylinder double acting;
numeral 2 indicates double cylinder double acting;
Indicating that the cylinder inside diameter is the numeral in the model multiplied by 10, unit mm;Action and structural form
Pneumatic piston actuator model and specification
Single acting spring returnVCS16VCS25VCS30VCS36VCS42VCS50
Single cylinder
double actingVC12VC16VC22VC25VC28VC30VC36VC42VC50VC55VC60VC70VC80VC90
Double cylinder
double actingVC2-30VC2-36VC2-42VC2-50VC2-55VC2-60VC2-70VC2-80VC2-90VC2-100Pneumatic actuator performance parameters
1. Design pressure: 1.0MPa
2. Working pressure: 0.35~0.7MPa
3. Working medium: purified compressed air
4. Applicable environmental temperature: standard type (-20~+70ºC), low temperature type (-40~+70ºC)
5. Medium temperature: 5~55ºC(Compressed air lower than 5ºCshall be subject to special dewatering treatment.)
6. Form and action:
Single acting piston type (spring return), acting type: F.C or F.O
Double acting piston type, acting type: F.L
Double acting piston type with accident air tank, acting type: F.C or F.O
7. Handwheel mechanism form:
Handwheel: According to the installation positions, it can betop handwheel,top side-mounted handwheel,Middle side-mounted handwheel (See figure 2.1~2.8.)
Hydraulic hand-operated mechanism: only used for single acting (spring return) actuator with relatively high output force and travel (See figure 2.9~2.10.)
8. Pneumatic shut-off full-travel time: see table 1-8Pneumatic parallel double disc gate valve
Pneumatic actuator structural form
Figure 2.1 pneumatic double acting actuator