Active Vibration Isolation System Active Vibration Control Platform VCM200 Series

VCM200 Series Active Vibration Isolation Control PLatform
1. Safety Warning
The system is to be powered with AC. Please use AC power with protective earthing.
Make sure all the packing materials removed and there isn't any metals in the
ventilation hole.
Please connect the VCM and the controller correctly.
Any queries please do contact the supplier directly.2. General Introduction of the System
Overview:
With Jiangxi Liansheng active vibration isolation VCM Series, sub-herz vibration
isolation performance can be achieved across all six degrees of freedom and it can
provide 90% reduction at 5Hz, 95% reduction at 10Hz and above.
Features:
Active isolation from 1 - 200 Hz
Passive isolation beyond 200 Hz
Isolates in all six degrees of freedom
Internal feedback loop
Free combination as per load and dimension requirements
Easy installation and simple to use without persistent maintenance
Technical Specification:
Isolation range:1- 200Hz
Isolation Directions:all six degrees of freedom with internal feedback loop
Isolation Efficiency:>5Hz =90%, >10Hz = 95% (@0.1mm/s)
Load Capacity:15-300Kg
10-20 ms responsive time
Net weight:15kg
Power Supply:220V, 50Hz
Power input: 50W
Working temperature:5- 40C°
Placed on a platform with flatness less than 0.5mm.
Platform Dimension:(600*500mmm - 800*1000mm)Applications:
Scanning tunneling microscopy(AFM/LFM/STM)
Interferometry
Electron microscopyTechnology:
The working principle of the active isolation technology within the VCM Series is that
the piezoelectric vibration sensors collect and convert dynamic vibration energy into
electrical signals. The signals are transmitted to the piezo actuators.
Transmission: