Adhesive Lined Dual Wall Heat Shrink Tubing

SBRS-125G(2X)(3X)(4X)
Environmentally Friendly Adhesive lined Dual Wall Heat Shrink Tubing
Description
SBRS-125G (3X) (4X)-Aisa cross-linked polyolefin tube that is extruded with an inner layer of adhesive. The inner layer of adhesive, with superior sealing capability, is also a buffer against mechanical strain. Dual wall heat shrink tubing is designed to provide superior sealing against water, corrosive gas and chemicals. Typical applications include environmental sealing of in-line splices, sealing and strain relief of connectors and terminals, abrasion protection and electrical insulation of automotive wiring harness splices and valuable components, fleet & marine sealing & protection and wire bundling etc.
Features
lStandard:UL 224
lShrink ratio:2:1 3:1 4:1
lFlame retardant out layer, environmentally friendly,UV resistant
lShrink temperature:70~125degrees
lContinuous operating temperature:-45~125degrees
lRoHS compliant
lStandard colors:black,other colors are available on request


Technical Data
Technical performance of adhesive
SizesD I.D. As Supplied(mm)After Full Recovery(mm)Standard PackageI.D.Wall ThicknessThickness of Adhesive Layer(m/spool)Φ1.6≥1.6≤0.800.60±0.150.30±0.10200Φ2.4≥2.4≤1.200.70±0.150.35±0.10200Φ3.2≥3.2≤1.600.70±0.150.35±0.10200Φ4.8≥4.8≤2.400.80±0.150.40±0.10100Φ6.4≥6.4≤3.200.80±0.150.40±0.10100Φ7.9≥7.9≤3.900.90±0.150.45±0.10100Φ9.5≥9.5≤4.800.90±0.150.45±0.1050Φ12.7≥12.7≤6.400.95±0.200.45±0.1025Φ15.9≥15.9≤7.900.95±0.200.45±0.1025Φ19.1≥19.1≤9.501.00±0.200.45±0.1025Φ25.4≥25.4≤12.701.10±0.200.50±0.1025Φ31.8≥31.8≤15.01.15±0.200.50±0.101.22Φ38.1≥38.1≤19.01.25±0.200.50±0.101.22Φ44.5≥44.5≤22.01.35±0.200.55±0.101.22Φ50.8≥50.8≤25.41.50±0.250.60±0.101.22 Note: Non-standard packages and sizes are available on your requestSBRS-125G (3X) Dimensions
SizeAs supplied ID(mm)After full recovery(mm)Standard packagemminchIDWall thicknessThickness of adhesive(m/spool, m/pc)Φ2.43/32≥2.4≤0.800.85±0.150.40±0.10200Φ3.21/8≥3.2≤1.000.95±0.150.40±0.10200Φ4.83/16≥4.8≤1.601.10±0.150.40±0.10100Φ6.41/4≥6.4≤2.201.20±0.150.45±0.10100Φ7.95/16≥7.9≤2.701.35±0.150.50±0.10100Φ9.53/8≥9.5≤3.201.45±0.200.50±0.1550Φ12.71/2≥12.7≤4.201.70±0.200.50±0.1525Φ15.05/8≥15.0≤5.201.80±0.200.55±0.1525Φ19.13/4≥19.1≤6.302.00±0.200.55±0.1525Φ25.41≥25.4≤8.502.10±0.250.55±0.1525Φ30.01-1/4≥30.0≤10.202.20±0.250.60±0.151.22Φ39.01-1/2≥39.0≤13.502.40±0.250.60±0.151.22Φ50.02≥50.0≤17.002.70±0.250.80±0.151.22Φ64.02-1/2≥64.0≤21.003.00±0.300.80±0.201.22Φ76.03≥76.0≤25.003.00±0.301.00±0.201.22Φ90.03-1/2≥90.0≤30.003.00±0.301.00±0.201.22Φ1004≥100≤34.003.00±0.301.00±0.201.22Φ1255≥125≤42.003.00±0.301.00±0.151.22 Note: Other nonstandard dimensions and packages are available on your request
SBRS-125G (4X) Dimensions
SizeAs supplied ID(mm)After full recovery(mm)Standard packagemminchIDWall thicknessThickness of adhesive(m/spool, m/pc)Φ4.02/13≥4.0≤1.01.0±0.150.40±0.15200Φ6.01/4≥6.0≤1.51.1±0.150.40±0.15100Φ8.05/16≥8.0≤2.01.2±0.150.50±0.15100Φ12.01/2≥12.0≤3.01.4±0.150.50±0.1525Φ16.05/8≥16.0≤4.01.7±0.150.60±0.1525Φ20.015/19≥20.0≤5.02.0±0.250.60±0.1525Φ24.01≥24.0≤6.02.1±0.250.60±0.1525Φ32.01-1/4≥32.0≤8.02.4±0.250.70±0.151.22Φ52.02≥52.0≤13.02.4±0.250.70±0.151.22