Airflow Dryer for Sawdust and Wood Chips

Airflow dryer for sawdust and wood chips

Introduction for Airflow dryer for sawdust and wood chips:
This air flow dryer is to dry material with higher moisture. After the moisture is reduced below 8-12%, the material is ready to be pressed into pellets or briquettes. The
air flow dryer is a pre-treatment facility always with a pellet mill or a briquette press.
Working principle:
The whole system consists of furnace, fan blower, motor engine, three-pass and two-pass drum, steel pipe, cyclone and air lock. In this system, wet wood dust is input into hopper by screw feeder.
Fuel furnace produces large volume of hot air. The hot air is driven into drum, mixed with wet wood dust, moved on spirally in the drum, and discharged at the end of drum; Humid air is
continuously exhausted, thus the material is dried.

Raw Material Scope of the Airflow dryer for sawdust and wood chips:

Features of the Airflow dryer for sawdust and wood chips:
- Size of raw materials: less than 5x5mm
- Reduce moisture from 30~35% to 8~12% (2-3 times)
- Thickness of stove: 4 mm steel
- Thickness of pipe: 2 mm steel

The main date of Airflow dryer for sawdust and wood chips:

ModelLB-260ALB-300ALB-350ALB-650*10

Drying Speed

(kgs/h)

200-250300-400600-700400-500Main Power(kw)47.5-11117.5+2.2

Max Diameter

(mm)

7809001050900

Min Diameter

(mm)

260300350300

Furnace Size(mm)

1600*900*11502000*1000*13002100*1020*13302000*1000*1300

Furnace Weight

(kg)

1230145017501500

Route(m)

18263520Dimension(m)9*2.5*3.116*2.5*3.222*3*3.320*3*3.2Total Weight(kg)1760266034603900Hot Air Temperature(ºC)150-200150-200150-200150-200Moisture ContentBefore Drying(%)40-5040-5040-5040-50Moisture ContentAfter Drying(%)8-128-128-128-12Airflow Velocity(m/s)8888Our Services

1)We can provide you theone year warrantybut without the spare parts.

2) Theprofessional and timely 24 hoursafter-sale service.

3) The relative vedio of the machine installation and instruction will be provided for you.

4) We can provide you the different mould to meet your different requirements.

5)Wecan also meetthespecial voltage demend.

6) The engineer is availiable to service machinery oversea

AAllthepartsandspare-partsofthemachinesarenew.

BThewarrantyis12months

COwingtothedesign/material/processingproblem,wecanchangethespare-partsasfree.

DIftheproblemscausedbytheuser,wecanrepairethemachines,andtheusershouldpayforthis.

FAQ

Q: why choose us?

A:We are the professional manufacturer, which has abundant experience of the machine, also we own research and development team.

Q:i know little for this machine, what should i do ?

A:please tell us your requirement: we will offer the most appropriate model for you.

Q:if the machine has a little mistake when produce and can not solve, what should i do?

A: please contach us immediately, by email, SKYPE, or telphone.our worker will give you the solution.

Placeorderorsendinquirywewouldliketoknowthefollowinginformation:

-Whatis your raw material?

-Capacityperhouryouneed?

-What's the moisture content of your raw material before dryer and after?