Anti-Collision System of Tower Crane (SYS/6000E)

Anti-collision and zone protection system SYS/6000E
System introduction
The system can provide real-time supervision and monitoring for up to 20 tower cranes in one single site, as well as saving records for tracking and checking.
It continuously calculates the relative locations of jib-arms and trolleys of the tower crane within the network that might interfere with each other. Upon detecting that there are possibilities of tower cranes interfering or even colliding with anther one or the tower crane hook(or jib)overstepping into the no-go "sensitive"(protected)zones, such as streets, highways, schools, public areas, and power lines etc., the system will give pre-alarm first until the operating system of the tower crane works, stopping the operation, thus keeping the possibilities of accidents from happening due to negligence or misjudgment by the operator and guaranteeing safe operation of the tower crane
XY coordinate system (covering the site) on site. Coordinate axis Y relative to North Pole (N) azimuth angle of the earth, the distributing series numbers of the tower cranes on site, corresponding single system series numbers, each tower crane XY coordinate values, height, max/min hook range, counter-jib length, anti-collision data etc.
When the system is in normal running, if one of the tower cranes needs to rise,
The system can manage the height amendment and pass wirelessly.
Another tower crane can be added to this working network, or taken off one working tower crane from this network.