Anticorrosive Extruded 100% Virgin PTFE Plastic Solid Rod/Bar

about PTFE: PTFE resistant to practically every chemical known to man and has a surface as slippery as ice on ice to which no substance will adhere. PTFE will operate continuously at 260°C in harsh conditions for long periods. It will not degrade when exposed to long term sunlight.
PTFE is available in sheets, rods, tubes and plates in various different grades. Other forms of PTFE available include: glass filled and Skived Tapes.Advantages:Outstanding chemical resistanceSuperb electrical insulating properties and high dielectric propertiesStability work in temperature range from 260°C down to liquid nitrogen temperatures (-260°C)And a very low coefficient of friction, resulting in unique non-stick behaviourLowest co-efficient of frictionPhysiologically inertNon-toxicKey Features:Unaffected by almost all chemicalsContinuous use at high temperaturesSlippery non-stick surfaceOutstanding dielectric properties
Applications:SealsSeatsPackingChevronsPiston rings, glide rings, lantern rings and back up ringsSlide bearingsElectrical and thermal insulators
PTFE Products:Molded Virgin PTFE: Unfilled, natural15% or 25% Glass filled: Oxidation and acid resistance, dimensional stability, good electrical properties25% Carbon filled: Excellent dry wear resistance, good chemical resistance, lowest electrical resistance, good wear resistance in water applications

PTFE Properties Data SheetTechnical DataMethod of VerificationUnitPTFEPhysical PropertiesDensityISO 1183g/cm32.3Water absorptionISO 62%<0.05Mechanical PropertiesTensile strength at yieldISO 527-2MPa25Tensile strength at breakISO 527-2Mpa-Elongation at breakISO 527-2%>50Modulus of elasticity after tensile testISO 527-2MPa700Modulus of elasticity after flexural testISO 178MPa-Hardness-RockwellISO 2039-2-Hardness - Shore DDIN 5350555-60Charpy impact strength at 23 CISO 179kJ/m2N.B.Friction coefficientDIN 533750.08Thermal PropertiesHeat deflection temperature - HDT/AISO 75-2C-Max. service temperature - Short termC260Max. service temperature - Long termC260Thermal conductivity at 23 CDIN 11359W/(K*m)0.25Coefficient of linear thermal expansionISO 1135910 -4* K -11.2Electrical PropertiesDielectric constant at 1 MHzIEC 6025010 6 Hz2.10Dielectric loss factor at 1 MHzIEC 6025010 6 Hz0.0002Volume resistivelyIEC 60093Ohm (Ω) * cm>10 16Surface resisivelyIEC 60093Ohm (Ω)>10 16Dielectric strengthIEC 60243-1kV/mm48Miscellaneous DataFlammabilityUL 94ClassV-0NOTE: 1 g/cm3 = 1,000 kg/m3, 1 Mpa = 1 N/mm2, 1kV/mm = 1 MV/mStatement:NOTE: The information contained herein are typical values intended for reference and comparison purposes only. They should NOT be used as a basis for design specifications or quality control. ENERGETIC will not provide any legally binding guarantee of certain properties, or any suitability.