Automatic Door Photocell

1.Panel Instruction and Use Description
1. Far detection distance
2. Near detection distance
3. Double-beam optical access
4. Single-beam optical access
5. Emission contact 2 and Receive contact 2
6. Power indicator
7. Input power contact, Emission contact 1&Receive contact1
8. N.O. and N.C. Contact selection.2. The Overall Characteristics:**Adopt microcomputer control technology, high integration with high stability.**International optical lens design with good focus quality, controlled angle is rational, easy to be installed.**Far transmit distance with strong, anti-interference ability.**Adopting receiving filter, decoding, amplification system of German technology. Effective solution to anti-interference of natural daylight.**Emission electric eye adopts low-power consumption design with far transmit.**Emission contact and receive contact output separately with shielding line.**When the signal light be blocked, N.O or N.C contact can be flexibly chosen.**With 12-36V AC-DC power input.
3.Specific Considerations**Drilling the mounting holes of 13mm for electric eye installations.**Select the single-beam optical access: installation height within 60cm.
Select the double-beam optical access: Installation height of one group within 30cm while the other be installed within 90cm.**Emission contact and receive contact should be connected on 8pin terminal in case of single sensor beam be selected.**Adjust the installation place into vertical and horizontal position. And sundries should not be put around to avoid error action.**Installation height of receiver should be within 20cm from the background.**Don't place into moisture or direct sunshine.
5. Technic Parameters:Supply power: AC/DC 12-36V
Static current: 25mA
Action current: 40mA
The maximum transmit distance: 10m
N.O or N.C contact: Done by N.O/N.C contact selection
Beam: Single beam or double beam
Working environment temperature: -42ºC~45ºC
Working environment humidity: 10~90%RH
Appearance dimensions( controller ): 123(L)x50(W)x32(H)mm
Appearance dimensions( magic eye head ): 19(L)x13(D)mmPictures:Other Automatic Doors Accessories1. Operation
The automatic door operator is to be fully electronic operator, housed in a fully anodised aluminum transom section.
2.Controller
The intelliget controller unit can be programmed for connection to any security/alarm systems, is self monitoring and calibrating, has memory for all data on door stoke and brake positions.
3.UPS
The operator has built-in uninterrupted power supply (Battery back up) operation and security during power failure.
4.Belt Drive
Drive is by way of toothed belt, which is reinforced with fiberglass tensile members, and has nylon facing surface for tooth protection on the pulleys. This combination produces silent accurate operation.
5.Tracking
The track is self-cleaning duel linear. The upper track is made of harder stronger alloy 6351T6, and can be replaced without moving the transom. The wheel trolley is fitted with anti-rise wheels, resulting in very firmly fitted doors with operation free of any racking.
6.Locking
Electromechanical Locking: An electric lock option is available to give total security and can be adapted where manual locking cannot be achieved, i. E. frameless toughened Glass doors. Lock is the microprocessor controlled electric locking system. The microprocessor monitors all aspects of the lock functions. E. G. To ensure the door is fully closed when the lock is 100% engaged. Terminal outputs are available to signal to security system both door positions and lock status.