Automatic Wire Both Ends Terminal Crimping Machine

Full Automatic Pneumatic Double Ends Wire Terminal Crimping MachineFeatures
*Applied for automobile harness & high precision request wiring system
*9 Pieces Mitsubishi servo systems applied
* Crimping height adjusted by the digital control systemtolerance less than 0.03mm
* Applied for 30 & 40mm stroke. Compared with the traditional machine which only has 30mm stroke, but this manchine is applied for double stroke(30&40mm)
*Wire feeding device without mechanical adjustment
* RZT innovated DSP control system VS PLC for common.Standard specificationItemPerformanceProductNameFull digital both ends crimping machineBrandNameRZTModelRZT-208AFunctionWire cutting, single end stripping, both ends stripping, single end crimping, both ends crimpingCapacity3000PCS/Hour(Depending on the type of the wire, wire length, the stripping length and the terminal type.)Cutting length27mm~20,000mmCutting length accuracy<100mm, 0.5mm+ preset cutting lengthx0.002;Cutting length accuracy>100mm, 1.0mm+ preset cutting lengthx0.002Stripping lengthNo.1: 0.1mm~ 10.0mmStripping lengthNo.2: 0.1mm~ 17.0mmStripping length accuracyTolerance at ± 0.1mmCrimping capacity21500NDetectorsWire existence, wire knotting, terminal presence, terminal crimping, stripping detecting, air pressureWire sizeAWG#14~AWG#30Power source1 phase/3 phase AC220VDriverMITSUBISHI servo motorGas source>0.4~0.5MPa,60Nl/min aboveDimensionLength:950mm Width:800mm Height:1290mm
(Excluding projecting portions)