BT-S700B2 Hospital ICU Room Patient Breathing Equipment used surgical room Medical Ventilator Machin

BT-S700B2 Hospital ICU Room Patient Breathing Equipment used surgical room Medical Ventilator Machine Price With Air Compressor

Product Description

ICU Ventilator Machine Price Specifications:

Physical specifications

Display

10.4'' LCD Display

Mode:

pneumatically powered and electrically controlled system

Trolley:

Fitted with 4 nos anti-static rubber castors; two of which are lockable for braking and easy maneuverability with foot operated brake provisions

Technical Specifications:

Gas requirement:

Medical oxygen and nitrous oxide with a pressure ranging from 280~600kpa

safety valve

<12.5 kPa

Respiratory Rate

1 ~ 99 bpm

Oxygen Concentration

21% ~ 100%

Maximum Minute ventilation

≥18L / min

modes of ventilation

A/C, IPPV, SIPPV, IMV, SIMV, PEET. MANUAL, SIGH, SPONT

Ventilator compliance

≤30 Ml/kPa

PEEP:

0 ~ 1.0 kPa

Ptr:

-10 ~ 10 hPa

IMV frequency:

1~20 bpm

I/E Ratio:

4:1~1:4, Has the inverse ratio ventilation

Tidal Volume

Setting Range: 50~1500MLDisplay Range: 0~2000ml ; resolution ratio: 10ml

Inspiratory Plateau:

0~1s

Maximum Safety Pressure

≤ 6.0kPa

Sigh:

one deep breath per 80 controlled respirations, the inspiration time is 1.5 times of the setting point

Pressure limit range:

1.0~ 6.0kPa

Airway pressure alarm: Audible and visual and with yellow and red color indicating

Lower: 0.1 kPa ~ 6.0 kPa;Upper: 0 ~ 5.0 kPa

±0.2 kPa

Ventilation Volume alarm:

≥ 18L/ MIN

Power Supply Alarm

Ac/dc power supply are after failing to send out alarm immediately
Alarm Time: keep >120s

The airway pressure continues to be higher than 15 hPa ±1 hPa for 15s±1s, then the machine will raise an audible alarm, the pressure will be displayed in red and the continuous high pressure red alarm wording is displayed on the screen of the anesthetic respirator.

Operating conditions

Ambient temperature:

10 ~ 40oC

Relative humidity:

no higher than 80 %

Atmospheric pressure:

860 hPa ~ 1060 hPa

Power requirement:

100-120 Vac, 50/60 Hz;

Attention: the AC power supply used for the anesthesia machine must be wellgrounded.

Attention: the anesthesia machine used must be equipped with a carbon dioxide monitor complying with ISO 9918:1993, an oxygen monitor complying with ISO 7767:1997 and an expiratory gas volume monitor complying with 51.101.4.2 of Medical Electrical Equipment Part II: Special Requirements for Safety and Basic Performance of Anesthesia System.

Storage

Ambient temperature:

-15oC ~ +50oC

Relative humidity:

no higher than 95 %

Atmospheric pressure:

86 kPa ~ 106 kPa.

It should be stored in a room without corrosive gas and well ventilated

Package

packaging box

comply with the requirement of GB/T 15464

Between the packaging box and product, soft material with appropriate thickness provided to prevent loosening and mutual friction during transportation

Moisture protection and rain protection to ensure that product is protected from natural damage.

Safty & Alarm

Gas source pressure

Immediate alarm; “high level alarm” indicator flickers raising an audible alarm.

Airway Pressure Alarm

The airway pressure exceeds 15hpa. The maximum delay is no longer than 17s. The “high level alarm” indicator flickers raising an audible alarm.

Tidal Volume Alarm

Lower than 50ml, The alarm will be raised after one breathing cycle.

Ventilation Volume Alarm

Lower: 0~12L/Min;Up: 18L/ Min

Battery Voltage Alarm

It alrms when the battery voltage is lower than 10.5V.

Power On Self Test

Self test before working, assure it's working normally.

ICU Ventilator Machine Price Other Models:

Company Information

FAQ

WHY US?

The Quality We Provide - Outstanding Quality Assurance

Control from production process:

-We don't send parts out for pretreatment, all process would be supervised under inspection department

-7 stages pretreatment meet international standard

-Baking at high temperature after power coating to ensure the paint finish

Control from material:

-All bolts and screws are of SS material

-Mild steel ERW rectangular tubes or sheets 1.2-2.0mm thickness, meet EU standard

-Plastic material is of ABS only. Durable and Sturdy. At least 10 years lifetime. Different colors for options.

Control from inspection:

-Process inspections after cold working, acid washing,powder coating and assembling

Final inspection before loading in random checking

-SGS third party inspection available if required

The Service We Provide - We Take Care Of Your Order

Punctual delivery time:

-We put your order into our tight production schedule, ensure your punctual delivery time.

-Production / inspection report before your order packed.

-Shipping notice/ insurance to you as soon as your order is shipped.

After sales service:

-We respect your feed back after receive the goods.

-We provide 12-24 months warranty after goods arrive.

-We promise all spare parts available in lifetime use.

-We large your complain within 48hours.

Professional sales:

-We value every inquiry sent to us, ensure quick competitive offer.

-We cooperate with customer to bid tenders. Provide all necessary document.

-We are a sales team, with all techinical support from engineer team.