Balance Machine for Crankshafts (CS)

Schenck BalanceMachine for crankshafts, CS- Modular construction
- Integral drilling station with linear guide mechanism
- Software controlled display of drilling depth, tolerance calculation and indexing aid
- High-performance CAB700 or CAB803 measuring instrumentationCS30 crankshaft balancing machinery are conceived in particular for low-volume production and overhaul shops. The CS30 is a hard-bearing machine with permanent calibration. This means that a new rotor can be mounted easily and balanced after entering only a few geometrical rotor data.The integrated measuring instrumentation directly displays unbalance with amount and angular position, depending on the initial unbalnce of the rotor.CS30 balancing machinery are suitable for rotors weighing up to 700kg. A powerful underslung belt drive ensure short acceleration periods for short balancing cycles. The machiness compact and sturdy design concept provides for a small footprint.CS30 balancing machinery can be used with the CAB700 or CAB803 measuring instrumentation and can also be equipped with a report printer.A further advantage of the CS30 balancing machine lies in its area universal applicability. The machine is also suitable for other rigid rotors provided that they do not exceed the geometrical limits of the machine.Unbalance correction is performed directly on the CS30 by a high performance drilling unit. There is therefore no need to remove the work-piece from the machine and install it on a separate correction unit.Product parametersTechnical data at a glanceCS30MachineMeasuring unitCAB700Length of machine bedmm1500URR95%Umargmm10Bearing pedestal distancemm min.70Bearing pedestal distance with belt drivemm min120Distance between correction planesmm max.800Max. drill diametermm16RotorLengthmm max.1100WeightKg max.680Diameter above machine basemm400Main journal diametermm10-80Drive systemSpindle speedrpm230/510/1300/2850Balancing speedrpm160-1600PowerkVA0.75