Hydraulic Air Service Jack With CE Approval/80 Ton air hydraulic jack / air lifting jack with competitive price
Model type
50-T3
Type
AIR HYDRAULIC JACKS
Lifting Capacity
10/25/50T
Min Height
151mm
Max Height
317mm
Lifting Height
10T:52mm
25T:54 mm
50T:60mm
Working air pressure
0.9-1.2Mpa
Net weight
57kg
Grossweight
73kg
Packing size:
1450*330*280mm
Lifting:
1.Connect adequate air source to the air supply inlet(Air pressure 0.9-1.2Mpa)
2.Turn the control valve clockwise until the pump starts.
3.Transfer the load immediately to appropriately rated jack stands.
Lowering:
1.Raise load high enough to clear the jack stands.
2.Remove jack stands carefully(always used in pairs).
3.Slowly turn handle knob counter-clockwise, if the load fails to lower:
(a).Use another jack to raise the vehicle high enough to reinstall jack stands.
(b).Remove the malfunction jack and then jack stands.
(c).Use the functioning jack to lower the vehicle.
4.After removing jack from under the vehicle, fully retract the jack to reduce ram exposure to rust and contamination.