Bike Turning Light, Signal Running Night Light

bike turning light, Signal running Night Light

Features:

1.2.4g wireless remote control control turn indicator, wireless remote control control tail light indicator.
2. The host battery uses 2025 two sections and the battery life is 10 hours.
3. The remote control uses the CR2032 section, which can be used for three months.
4. The belt size is 4X120cm (adjustable, both men and women can use)

Instructions for use:
1. Press and hold the turn signal switch for 2 seconds to turn on (all lights flash three times), short press to turn off (all lights flash), after the boot, the host red light gap flashes.
2. Press and hold the 3 second pair code (the turn indicator is fully illuminated), press any key pair code on the remote control, and the key function will be displayed successfully.
3. Press the remote control left turn button (the left indicator light flashes) to the left, the left cut head flashes, press again, press the right turn button (the right indicator flashes), turn right, the right cut head flashes, then Click off.
4. Press the middle taillight graphic button of the remote control (the blue indicator light flashes), turn on the taillights, and press again.
5. Open the battery cover of the main unit, press the polarity of the battery correctly, cover the battery cover, and turn the cover to replace the remote control battery according to the instruction of the cutting head.
6. Put the turn signal belt into the belt