Boiler, Furnace and Dryer Used Biomass Wood Gasifier Incinerator Biomass Gasifier Docking Oil Burner

Company IntroductionShangqiu Haiqi Machinery Equipment Co.,Ltd is the first professional organization organizations which engaged in energy, environmental protection, energy saving technology development and related product development in China.
The company has about 100 staffs, 40 technicians, among of 1 chief engineer, 5 senior engineers,20 key technicians,5 overseas experts.
Production DescriptionBiomass gasifier is basically conversion of solid fuels (wood/ wood-waste, agricultural residues etc.) into a combustible gas mixture normally called Producer Gas. The process is typically used for various biomass materials and it involves partial combustion of such biomass Partial combustion process occurs when air supply (O2) is less than adequate for the complete combustion of biomass.
Biomass gasifier can be used to supply heat source for steam boiler, hot water boiler, thermal oil heater, aluminum melting furnace, rotary dryer, industrial furnace, drying kiln system, etc. Also can connect with generator to produce electricity.
Raw Material:Wood Chips, Rice Husk, Palm Shell, Coconut Shell, and all kinds of agricultual & forestry waste, houshold waste, industrial waste, medical waste, etc...
Raw Material Required: Moisture≤15% & Size : 3-10cm
Gasification System:1.Feature of the draft-down fixed bed type gasifier is the same moving direction of gas and biomass material. The pyrolysis products must go through the hot oxidation layer, and the tar in volatile can be full pyrolysis, so the tar content is low.
2. The dried bulk fuel (moisture<=20%) and the mixture with small crude particle is suitable material. Easy and reliable operation.
Purification System:The syngas from the gasifier can be used a) in internal combustion engines, b) for direct heat applications. However in order for the gas to be used for any of the above applications, it should be cleaned
of tar and dust and be cooled.
To meet the requirement of the genset, the purification system will reduce dust<=50mg/m3, tar<=25mg/m3, temperature<=40°C before syngas come into genset.
Main Features:
1.The gasifier uses fixed bed down-draft type, produce syngas continously and stably with low tar content.
2.Easy to use and operate, use Siemens PLC touch screen control panel to realize automatic control and semi-automatic control. Independent operation room, adjust parameter directly by controlling LCD touch screen.3.Due to MSW gasification process adopts pyrolysis and accurate control in different stage, so it can reach specified flue gas standard.4.Due to low temperature gasification combustion(gasifier furnace) under anaerobic condition and low temperature gasifier and combustion, only producing combustible gas, particulate matter emission is precious little.5.Finish low temperature oxidation process in high temperature combustion chamber (combustion furnace), not producing harmful gas secondary pollution.
6.Due to combustion process is complete, the ash is completely non- pollution matter.7.The removal rate of organic is over 90%, so it reduce the follow-up treatment cost greatly.8.All kinds of waste with different composition can burn stably at the same time.9.Safety separation combustion, restrict dioxin and other harmful matter output.10.Operation 24 hours/day continuous.11. Waste need to sort out, and improved operation efficency, ensure the safety of working environment.12.Haiqi gasification system is fully closed, it is neat and beautiful look at site, no harmful to operation people. Automatic fuzzy control, easy to operate. All fuel feeding, slag discharge door, overhaul hole use soft seal, On the top of furnace has a seal cover to avoid gas leakage. The sealing of furnace is good, realizing good effect of oxygen controlling and pyrolysis.13.When pyrolysis gas spontaneous combustion take place, then it enter into a process of spontaneous combustion, auxiliary combustion device will stop automatically. The whole process of spontaneous combustion is over 90%, greatly lower running cost. Realized resource utilization of waste thermal energy. Flue gas emission is no harmful and total CO2 emission is reduced.Technical Parameter
Model
Fuel consumptionGas outputFuel SizeFuel Moisture
HQ-LX1500
80-140 kg/h240-320 m3<100 mm<20%
HQ-LX1800
160-280 kg/h480-680 m3<100 mm<20%
HQ-LX2000
300-400 kg/h900-1200 m3<100 mm<20%
HQ-LX2200
500-600 kg/h1200-1400 m3<100 mm<20%
HQ-LX2400
700-800 kg/h1600-1800 m3<100 mm<20%
HQ-LX2600
900-1000 kg/h2200-2600 m3<100 mm<20%
HQ-LX3000
1200-1500 kg/h2800-3200 m3<100 mm<20%