Brown Gas Cutting Equipment (Kingkar3000)

Working Principle:Electricity flows to the Adjustable Transformer Controller; The alternating current then goes into the Commutator, and transforms into direct current.
The direct current connects to the anode "+", and cathode "-" in the electrolytic cell, to electrolyze water into pure hydrogen and oxygen.
As the Oxyhydrogen gas passes through the filter and pressure detector, the flame device (with antibackfire safety valve) ignites to atemperature between 800 and 3200 degrees centigrade.
It can be used for precision cutting processing equipment, giving results that are economical, reliable, safe, and environmental.
Features:Ecology and environmental:
The gas generated by our machines can be completely burned without smoke and carbon monoxide. Therefore, pollution, toxins and public nuisance won't be generated.High standards of safety:
Consistent torch -the energy is available as soon as you turn on the machine.
Multiple safety devices are built-in.
When insufficient water or coolant is present, or when overheated, the machine will cut off automatically, thus ensuring the safety of equipment and users alike.Economy and practicality:
Requires only easily accessible soft water and asmall amount of electric power.
The fuel produced can be widely applied, replacing traditional dangerous gases (including LPG and acetylene) currently used.
Most existing equipment can be used with our generators.High Mobility:
The machine size is appropriate for its job, and many of our Oxyhydrogen generators come installed with wheels to facilitate mobility.
Each can immediately generate fuel after aminimum set-up, and be used for long periods.NO Heat Waste:
Eliminates heat waste and radiation. Maintaining aconsistent working environment, thus preventing operator fatigue due to radiant heat.
This can reduce operating costs and accidents.
SteelThickness
Acetylene
Kingkar Brown gas Generator
Efficiency
Consumption
(NL/min)
Cost
($NT)
TimeMin.'Sec."
Electricity
(Kwh)
Coolant
(cc)
Cost($NT)
TimeMin.'Sec."
6mm
4
1.2373
2'00"
0.09
35
0.892
1'52"
8secondsfaster
12mm
9
3.253
2'20"
0.155
38
1.158
2'16"
4secondsfaster
20mm
9
4.0643
2'55"
0.158
38
1.167
2'30"
25secondsfaster
50mm
13
7.88
3'55"
0.221
55
1.664
3'38"
17secondsfaster
Technical Data Sheet
ModelKingkar-3000Kingkar-5000Kingkar-7000Kingkar-10000Voltage(V)380 ±10%,50/60Hz,three phaseRated capacity(KVA)9152231Working pressure(Mpa)≤0.2Relative humidity(%)≤90Rated gas output(L/H)3000±10%5000±10%7000±10%10000±10%Water consumption(L/H)1.62.73.85.8Maximum Cutting Thickness(mm)110220310420Effective perforated thickness(mm)40607090Cooling wayAir coolingInsulation classFpower protection gradeIP2SFlame temperature(T)800-3200 adjustableWorking mediumFiltered water or deionized water or soft waterWorkingcontinuousenvironment temperature(T)0-40Dimension(LxWxH)mm1020*770*12701250*830*17201300*930*18201500*930*1940Weight(KG)293567653894