Building Material Cone Calorimeter ISO 5660, ASTM E1354, BS 476-15

Building Material Cone Calorimeter ISO 5660, ASTM E1354, BS 476-15International Standards:ISO 5660ASTM E 1354BS 476 Pt.15
Introduction:
The name Cone Calorimeter is derived from the conical heater as used by Dr. Vytenis Babrauskas to inspect test specimen(100x100) with flux up to 100/ for the bench scale oxygen depletion of his development.Cone Calorimeter is based on the theory that pure combustion calories are in proportion to a necessary amount of oxygen for combustion and 13.1 MJ/kg is generated whenever oxygen 1kg is consumed, and heat emission, ignition time, oxygen consumption, CO and CO2generation, and flow of ignited gases as generated from test materials are measured.Cone Calorimeter, as properly sized for lab use, is designed to enable auto operation of all units connected with DAQ(Data Acquisition) Program so that user can conveniently perform test. Also, it reduces installation space and automatically advances test with the 17inchTouch Screen. This tester fully meets the international standard.Specifications:Basic SpecificationsExhaust50 l/sSize1750(W) x 600(D) x 2800(H)Weight450 kgPower220 V AC, 60 Hz, 30 ATest ResultsParametersUnitHeat FluxkW/m2Exhaust duct flow rateL/sC factorL/kgmKIgnition time and extinguisment timesTotal oxygen consumptiongTotal Smoke Releasem/m2Mass loss and Mass loss rateg, g/sHeat release rateMJ/kg, kw/m2Effective heat of combustionMJ/kgCarbon monoxide yieldkg/kgCarbon dioxide yieldkg/kg
Features:Integrated body and 19 analysis rack17inchtouch screen panel type PC for the whole control and automatic testingAutomatic Spark Igniter to facilitate measurement of ignition timeAuto Split Shutter automatically opened to transmit radiation to the sampleAbsorber-type glass protection door to facilitate sample observation during test and opening and closingUK Servomexs Gas Analyzerto exactly measure O2, CO, andCO2concentrations up to 0.02%Port, heated filter, and heated line to measure toxic gasesMFC(Mass Flow Controller) used for all gas flows, improving accuracy of and automatically controlling fluxPortable water cooling system without need for waterworks and plumbing when using the Heat Fluxmeter (for ISO 5660)UK RS LoadCell with improved accuracy to measure mass loss rateCC 2006 DAQ(Data Acquisition) Program controllable with the touch screen panel