CB Class Automatic Transfer Switch ATS 6-1000A

SQ3 CB class Automatic Transfer Switch ATS 6-1000ASQ3-63 series automatic transfer switch is designed and developed by our company according to universal customers' requirements. This switch uses DZ47 miniature circuit breaker (improved type) as the actuating element, is equipped with the new type control mechanism. With the smallest volume among the similar products, it also has the functions like the fire control and power generation, and, it is specially used in the important power supply locations where the power failure is not allowed.Product Details Show
TypesCarton Size
GW/
Carton
NW/
Carton
QTY/
cartonLWHATS SQ3-63/4P 63A0.4850.310.2817.5315.538ATS SQ3-100/4P 100A0.350.260.3015142ATS SQ3-225/4P 225A0.400.260.3319182ATS SQ3-400/4P 400A0.580.380.2425241ATS SQ3-630/4P 630A0.670.380.2433321
Normal working conditions Ambient temperature: -5~+40ºC, and the average temperature in 24 hours below +35ºC(except for special orders).
Elevation of installation site: 2000m
Relative humidity: not exceeding 50% at the maximum ambient temperature of +40ºC.
With lower temperature, higher humidity would be permitted, but the lowest average temperature in a month not exceeding 90% in
that month, andgiving consideration tothe dews on the goods surface, which would appear due to temperature change.
Pollution protection: 3 grade
The breaker should be put in the place where there isn't any explosive medium and conductive dust and no gas, which would
corrode metal or destroy theinsulation.Structure and properties SQ3 is a critical component of any emergency or standby power system. When thenormal (preferred) source of power is lost, a transfer switch quickly and safely shifts the load circuit from the normal source of power to the emergency (alternate) source of power. This permits critical loads to continue running with minimal or no outage. After the normal source of power has been restored, the re-transfer process returns the load circuit to the normal power source.1) The setting is formed with two sets of power-operated operation mechanism circuit breakers and mechanical interlocking, fuse, wiring
terminal.
2) Two-set circuit breakers have electric interlocking and mechanical interlocking double protections to prevent the two-set circuit
breaker close on at the same time.
3) The setting suits for 220V working voltage (circuit breaker rated working voltage), control the power pass the case, frame board
control pushbutton (user self-prepared and connect to) direct control two sets power operated operation mechanism to carry out the power reliable switch over.
4) Suitable for general manual work control occasion, simple structure, low cost.Certificate
Company InformationFAQ:Q: What's your warranty?
A: Two yearsQ: How can I trust you and your company?
A: Suntree is a group company, we have 6 sub-companies.
Have cooperation with LS, EKF the world-class companies.
Our company over 500 employees, products pass
CE,IEC,TUV,SAA, RCM, ROHS certificates.Q: What's your contact information:
A: Our address: Liushi town, Zhejiang province, China.
Q: What's your shipment method?
A: We ship by Express, by air, by sea, by train. Normally we checked and compare,
then provide the customer the most proper shipment method.Q: What's about MOQ?
A: First order MOQ=1pcsQ: If I want to release order, what's the payment method you accept?
A: We accept T/T, Paypal, Money Gram, L/C.Q: If I want to release order, what's the process?
A: Thanks. You can send an inquiry to us by made-in-china,
or send us by email, we will reply within 24hrs.Thank you & Now pls send your inquiry! ^!^