CE Marked SS316L Small Size Gauge Customized Piezoresistive Pressure Sensor MPM280

CE Marked SS316L Small Size Gauge Customized Piezoresistive Pressure Sensor MPM280
General MPM280 Piezoresistive Pressure Sensor
The outline, installation dimension and sealing method of General MPM280 is strongly interchangeable, it is widely used for measuring pressure which is compatible with stainless steel and Viton;MPM280 pressre sensor provides vacuum measurement, and the lowest pressure can be -100kPa.
Electric ConnectionElectric connection: Kovar pin or 100mm silicon rubber flexible wires
Common mode voltage output: 50% of input (typ. )
Input impedance: 3KΩ~8KΩ
Output impedance: 3.5KΩ~6KΩ
Response (10%~90%): <1ms
Insulation resistor: 100MΩ, 100VDC
Construction SpecificationDiaphragm: Stainless steel 316L Titanium TA1 (MPM280 Ti) Tantalum Ta (MPM280 TH)
Housing: Stainless steel 316L Titanium TC4 (MPM280 Ti) Hastelloy C(MPM280 TH)
Pin: Kovar
O-ring: Viton
New weight: ~23G (General)
~ 50g (Flush diaphragm)
~ 125g (Assembled)
~ 13.5g (MPM280 Ti)
Environment ConditionPosition effect: Deviate 90° from any orientation, zero change ≤0.05%FS
Media compatibility: The gas or liquid which is compatible with construction material and Viton
Working Condition
Media temperature: (25±1)°C
Environment temperature: (25±1)°C
Shock: 0.1g (1m/s/s) Max
Humidity: (50%±10%) RH
Local air pressure: (86 ~106) kPa
Power supply: (1.5±0.0015)mADC
Specification:
Item*
Min.
Typ.
Max.
Units
Linearity
±0.15
±0.25
%FS,BFSL
Repeatability
±0.05
±0.075
%FS
Hysteresis
±0.05
±0.075
%FS
Zero output
±1
±2
mV DC
FS output**
70
mV DC
Zero thermal error
±0.75
±1.0
%FS, @25ºC
FS thermal error
±0.75
±1.0
%FS, @25ºC
Compensated temp. range
0~50
ºC
Working temp. range
-40~125
ºC
Storage temp. range
-40~125
ºC
Stability
±0.2
±0.3
%FS/year
*Testing at basic condition,G: Gauge; A: Absolute; S: Sealed gauge
** 0BG, FS output ≥45mV
0AG, FS output ≥60mV
02A, 03A, 02GY, 03GY, FS output ≥45mV
07A, 08A, 07GY, 08GY, FS output ≥60mVOutline Construction:
(Unit: mm)
Electric Connection:
Order guide:
MPM280(TH/TS/HHTi)*
Piezoresistive OEM Pressure Sensor
Range code
Pressure range
Ref.
Range code
Pressure range
Ref.
0B
0kPa~20kPa
G
12
0MPa~2MPa
G.A
0A
0kPa~35kPa
G.A
13
0MPa~3.5MPa
G.S.A
02
0kPa~70kPa
G.A
14
0MPa~7MPa
S.A
03
0kPa~100kPa
G.A
15
0MPa~10MPa
S.A
07
0kPa~200kPa
G.A
17
0MPa~20MPa
S.A
08
0kPa~350kPa
G.A
18
0MPa~35MPa
S.A
09
0kPa~700kPa
G.A
19
0MPa~70MPa
S.A
10
0kPa~1000kPa
G.A
20
0MPa~100MPa
S.A
Code
Pressure type
G
Gauge
A
Absolute
S
Sealed gauge
Code
Pressure connection
Installation
0 or null
O-ring
H1
M24x1 male
(assembled, P≤2MPa)
C1~C11 are available for pressure connections for both assembled and welded type
H2
M27x2 male
(assembled, P≤70MPa)
H3
M24x1 male
(welded, P≤2MPa)
H4
M27x2 male
(welded, P≤35MPa)
C1
M20x1.5 male,
face type seal
Pressure connection options for assembled or welded type
C2
G1/4 male
C3
G1/2 male
C4
G1/4 female
C5
M20X1.5male
waterline seal
C6
1/4NPT male
C7
1/4NPT female
C8
1/2NPT male
C9
1/2NPTfemale
C10
R1/4 male
C11
R1/2 male
PC1
Flush diaphragm
M20x1.5 male,
Top: M24x1 female
PC2
Flush diaphragm
R1/2 male,
PC3
Flush diaphragm
G1/2 male,
PD1
DN25 clamp
Code
Compensation
L
Laser trimming
M
Outer compensated resistor
(providing resistor value)
Code
Electric connection
1
Kovar pin(default)
2**
100mm silicon rubber flexible wires
Code
Special measurement
Y
Gauge sensor to measure vacuum(0kPa~-100kPa)
MPM280 09 G 0 L 1 Y The whole spec
Certificates We Have
Company Overview
Products FamilyFAQ:
1.Q: Are you manufacturer or trading company?
A: We are 48-year professional manufacturer of Pressure/ Level/ Temperature/Flow transmitters with 4~20mA, Hart, Rs485 & Modbus protocols, pressure sensors with SDI, I2C, 4~20mA, 0.5~4.5V and etc, and wireless IOT measurement transmitters. We provide high quality products with high competitive factory price.2. Q: What's your quality control system?
A: As an ISO9001:2008 certificated manufacturer, we have strict quality control system, and each product is done fatigue testing, calibration, temperature compensation before shipment. High quality is guaranteed.3.Q: Is there MOQ with your product?
A: We have no MOQ limits, 1pc for testing is acceptable.4.Q: Do you provide customized products?
A: Yes, we can print your logo on our products; OEM, ODM & customization are welcomed.5. Q: What is the warranty of your products? And after-sales service?
A: Our warranty time is 12 months after shipment, and our after-sales will respond with your questions in 24hrs, remote instruction by PC network is always available.6. Q: What is lead time of your product?
A: We are factory, our lead time is always within 10~15 working days for products without customization, but lead time will vary based on different products. You can check detail lead time with our sales.7. Q: What international certificates do you have for your products?
A: we have CE, RoHS, UL, ATEX as well as ship-use DNV etc.