CNC Flame and Plasma Cutting Machine

CNC Flame Cutting Machine / CNC Plasma Cutting Machine (PE-CUT-C1)
Contact: Lily
CNC Flame Cutting can cut easily-oxidized metal, such as mild steel, carbon steel 3~200 mm with common precision. It is a method of cutting ferrous metals in which the metal is heated by a torch to about 800 degree and is oxidized by a stream of oxygen from the torch.
CNC Plasma Cutting can cut both hardly-oxidized metal and easily-oxidized, such as stainless steel, brass, aluminium, zinc 1~60mm. Actually, CNC plasma cutting system is CNC + plasma power supply. It is a process that is used to cut steel and other metals using a plasma torch. In this process, an inert gas (in some units, compressed air) is blown at high speed out of a nozzle; At the same time an electrical arc is formed through that gas from the nozzle to the surface being cut, turning some of that gas to plasma. The plasma is sufficiently hot to melt the metal being cut and moves sufficiently fast to blow molten metal away from the cut.
Flame / Plasma Cutting Machine Features:
1. Machine design simple.
2. Bench-gantry structure, welding after the vibration aging treatment to eliminate stress, so that in the long-term use of no deformation.
3. All mechanical drive system using rolling bearings and precision machining accuracy as 6 GB of precision gears mesh with the rack
4. Planetary reduce drive system, its input and output error of only 16 arc minutes, at the same time, in the horizontal and vertical structure of the gear drive, an increase of automatic clearance compensation device so that it can accurately drive the structure of the implementation of the directives issued by the CNC.
5. Take the initiative to end beam: Vertical track for the introduction of automatic clamping device-oriented structure and there is no eccentric clamping structure, relying on automatic detachable power-oriented structure to make it two. In the track combined with the smooth running of the department will not have a wheel clamp tight or lax-phenomenon.
6. All the equipment look to see, such as steel, screws, using black or chrome handle.
7. Spray machine to use more advanced types of paint, the color demand on users.
Technical data:Product NameCNC Flame Cutter
/ Plasma CutterCNC Flame Cutter
/ Plasma CutterCNC Flame Cutter
/ Plasma CutterModel No.PE-CUT-C1PE-CUT-C2PE-CUT-C3lateral rail span6000mm4000mm3000mmeffective incise width5200mm3200mm2000mmlength of vertical rail6000mm6000mm3000mmeffective incise length4800mm4800mm2500mmNC cutting1 set1 set1 setauto-adjusting height system
of plasma arc voltage1 set1 set1 setauto-adjusting height system
of capacitance1 set1 set1 setcontrolled switchsomesomesomelifting height of cutting≤ 200mm≤ 200mm≤ 200mmcutting speed0-3500mm/min0-3500mm/min0-3500mm/minroughness of cutting surfaceRa≤ 12.5μ mRa≤ 12.5μ mRa≤ 12.5μ mdriving systemthree-phase AC motor dual-drivingthree-phase AC motor dual-drivingthree-phase AC motor single-driving
Welcome to contact us for perfect laser engraving cutting solution
Contect me:
Perfect Laser Co., Ltd. (China)
Contact:Lily /Sales Department
Tel:0086-27-86791986MP: 0086-13659889218Fax: 0086-27-86775865
Add:HengRuichuangzhi Technology Park, No.13 YangQiaohu Road, Jiangxia District, Optical Village, Wuhan, Hubei, China(430200).