CTI Counter Flow Cooling Equipment Cross Flow Closed Water Cooling Tower

CTI Counter Flow Cooling Equipment Cross Flow Closed Water Cooling Tower
BRIEF DEscriptIONWWW.MAIPT.LTD/The MPCT-TD/TS series use a combination of secondary heat exchange coil where air and water flow in the same direction and PVC filler, which enables efficient heattransfer. As the air and spray water flow through the coil in the same direction, the spray water can cover the surface of the coil to the maximum extent to ensure that thesurface of the coil is completely wet. Compared to the structure of air and water flowing reversely, the formation of dry spots and scale on the coil wall is greatly reduced.
Both of fans and pumps adopt high quality bearings without other wear parts.The fan adopts a direct connection structure so that there is no rotational loss caused by thepulley structure, and the noise is small and the failure rate is low.
INNER STRUCTURE AND MAIN PARTS INTRODUCTION
FEATURES & MATERIALSWWW.MAIPT.LTD/Space-saving, Light metal StructureCooling
SystemCooling CoilSUS304 Tube (DN18mm; Thickness: 0.8 mm), anti-freezing typeOptimized structural design and using steel structure make the floor area reduced greatly, the running weight is also greatly reducedCooling FinPVC Vacuum plastic, on-line lamination processSpraying PipeCorrosion resistant PVCGood Corrosion ResistanceSprayerABS, uniform water distribution, no dead corner, no dry pointTower body material is FRP with good corrosion resistance, the light stabilizer in resin has good anti-aging properties and won't fade.Spray PumpCast iron material, Siemens motor, High flow and low pump headCirculating
SystemBuffer TankSUS304 material; Usage: Buffering, Exhausting, Pressure maintainingDurable and Long LastingWater PumpOne used and the other is backup, controlled by frequency converterThe reinforced fiberglass without corrosion, reducing maintenance costs. All tower supports are made of thick steel and treated with hot dip zinc.
Fan Power
SystemFanExtruded aluminum alloy (airfoil type); high strength, corrosion resistanceMotor (IP55.F)Special for cooling tower, fully closed, low noise, maintenance-freeCombined type DesignBearingBearing steel, NSK/SKFIt's free to choose multiple cooling tower combined use as needed. The accessories are portable and easy to transport and install.DehydratorOriginal PVC sheet from FORMOSA PLASTICS, water saving.
Tower
BodyFront PanelAl-Zn alloy coated steel sheet, high intensity, corrosion resistanceEnergy-savingStructural SteelsHot Dip Galvanized material, three-times preservative treatmentLow wind resistance and heat dissipation filler combined with the unique streamlined design of the ventilator, save power consumption greatly.Bottom frameU-steel after special preservative treatment, long-lastingLow NoiseStandard PartsHot Dip Galvanized material, corrosion resistanceLarge size streamlined designed fan blade, combined with low speed running to make fan especially quietSealing TapeButyl rubber, reliable sealingElectric Control CabinetThickness: 1.5mm; Powder coating, LG contactorRemark: The materials of the above different parts are subject to customization accoring to unique requirements.TECHNICAL SPECIFICATIONWWW.MAIPT.LTD/ModelCooling CapacityOverall DimensionCooling FanPumpPipeline SizeWeightWater FlowThermal Power LWHBladePowerAir CapacityPowerIn/OutletOverflowDrainMake upN.W.R.W.m3/hkwmmmmmmmmkwm3/hkwmmmmmmmmkgkgMPCT-TD series Closed Type Counter Flow Cooling TowerMPCT-10TD1058210015002480Ф7000.5564000.55DN65DN25DN25DN256401730MPCT-15TD1587210015002700Ф7500.7596000.55DN65DN25DN25DN257101880MPCT-20TD20116210015002950Ф8000.75128000.55DN80DN25DN25DN258101920MPCT-30TD30174230018003080Ф8001.5192000.75DN80DN25DN25DN259202320MPCT-40TD40232280018003130Ф10001.5256001.1DN100DN32DN32DN3212002860MPCT-50TD50290280020003330Ф10001.5320001.1DN100DN32DN32DN3213803200MPCT-65TD65378295023003350Ф12002.2416001.5DN100DN32DN32DN3216203980MPCT-80TD80465360023003500Ф12003.0512002.2DN125DN40DN40DN4022805330MPCT-100TD100581430026003550Ф12004.0640003DN125DN40DN40DN4028007150MPCT-125TD125727480027003600Ф15005.5800003DN150DN40DN40DN4032907780MPCT-150TD150872530032004340Ф15004.0640005.5DN150DN40DN40DN4038809800MPCT-TS series Closed Type Cross Flow Cooling TowerMPCT-80TS80465230043003520Ф22005.51024001.1*2100*2DN40DN40DN4023405780MPCT-100TS100581230045003600Ф22005.51280001.1*2100*2DN40DN40DN4024006300MPCT-125TS125727260051003600Ф25007.51600001.5*2100*2DN40DN40DN4027807400MPCT-150TS150872260053003600Ф2500111920002.2*2125*2DN40DN40DN4033608450MPCT-175TS1751017310058003700Ф3000112240002.2*2125*2DN40DN40DN40362010400MPCT-200TS2001163310060003700Ф3000152560003*2125*2DN40DN40DN40393011200MPCT-225TS2251308330065003700Ф3200152880003*2150*2DN40DN40DN40434012900MPCT-250TS2501453330071004700Ф320018.53200003*2150*2DN50DN50DN50650014500MPCT-300TS3001744360078005400Ф3500223840004*2150*2DN50DN50DN50900021800Remark: 1. Design Conditions: Hot Water(inlet water) Temp.: T1=37ºC; Cold Water(outlet water) Temp.: T2=32ºC
Dry Bulb Temp.: TDB=31.8ºC; Wet Bulb Temp.: TWB=31.8ºC; Atmospheric Pressure: P=9.94x104Pa
2. Above specifications are for cooling tower with single fan, each model can be used alone or combined as needed.
3. The delivery lift of cooling tower is approximately equal to its height(H).OVERALLSIZES DRAWINGWWW.MAIPT.LTD/
PROJECT CASE AND APPILICATIONWWW.MAIPT.LTD/
APPLICATION FIELDS

Other appilcation fields: Heat Source Pump, Generating Set, Glass Melting Pit, Boiler Steam Condenses, Power Plant, Chemicals, Food, Cold Room, Pharmaceutical Factory etc.MAIPT provide The Complete Refrigeration System Solutions for customers.Besides the cooling tower, MAIPT also provide the Chiller Units and other related Installation Accessories and Maintenance Accessories.WHY CHOOSE MAIPT?WWW.MAIPT.LTD/>> You want experience…Experienced R&D team bring more than 10 years of process cooling & heating experience with knowledgeable application, product and service specialists available to discuss your needs.>> You want someone who understands your process...Provided with experience in a wide range of process cooling & heating industries. When you give us the chance, we will show the rich experience and get you the correct solution to your problems.>> You want a product that fits your unique needs...Offer a wide range of standard units, what's more, our application specialists can suggest the customized units to meet unique needs.>> You want specialized control...Build our own system controls from tailor made embedded micro-processor base products to PLC options. System control makes the difference in your process repeatability, efficiency and reliability.>> You want professional design manufacturer…MAIPT specialize in industrial fluid process temperature control fields, and provide the complete systems solutions.>> You want energy efficient solutions...Our specialists are aware of the rising cost of energy and the pressure to reduce energy consumption and we offer many energy saving products that favor lifetime costs.>> Our Service:OEM & ODM, or any other unique customized demands are acceptable.Any price inquiries or technical inquiries will be responded within 24 hours.Experienced technical engineers will give the model selection guide or help design the customized model.Detailed quotation scheme and system configuration will be provided to the customer together.The whole order process is tracked throughout,order production → performance test → packaging → transportation → customs declaration → shipmentcustomer will receive the notification mail (include photos, report or other documents) in each process.Besides the temperature control units, other install parts or auxiliary equipments is optional according to customers' requirements.All necessary installation documentation (e.g. Electrical diagram, User Manual) will be provided in both electronic copy and hard copy.Perfect after-sales service system, it's including:Technical guidance, detailed machine maintenance methods, troubleshooting solutions, regular return visit etc.>> Our WarrantyAll the products are passed strict test, and MAIPT provide 15 months guarantee since the date of bill of lading. During this guarantee period, MAIPT provide spare parts without any charge in case of quality discrepancy caused by us. If out of guarantee period, we still can charge the buyer cost price of spare parts and provide Technical Product support for customers.