Cast Iron Bs 5163 Non-Rising Stem Gate Valve (Z45T-16)

SPECIFICATIONS:
1.above 20 years professional OEM manufacturer.
2.API,CE,GOST,KS certificates.
3.Z45T-16
4.DN50 to DN300PRODUCT DETAILS
1.STANDARDS
design and manufacture:BS5163
face to face: BS5163
flange end:BS table E or D/BS4504
2.TEST
nominal pressure:1.6mpa
shell test:2.4mpa
seal test:1.8mpa
3.MAIN PARTS AND MATERIALS
body,bonnet: cast iron
disc:cast iron
stem:stainless steel 2Cr13
hand wheel:cast iron
seat ring: brass
o-ring:NBR
bolt:steel
gasket:NBR
gland:cast iron4.OUR FACTORYChina Yuanda Valve Group Co.,Ltd located in hinterland around the Beijing,Tianjin and Bohai economic center,it's founded in 1950s,restructuring on the basis of the former mechanical ministry longyao valve factory.It's the largest valve manufacturer in China engaged in Hebei Province,there are five branches under the group,the registered capital of 100 yuan in RMB,and the headquarter covers an area of 400,000 square meters,more than 3000 staffs.
Our products mainly adopt the standard of China GB, JB; America API, ANSI; BS; DIN; JIS; NF and Russia standard. Products mainly including: gate valve, globe valve, check valve, ball valve, butterfly valve, plug valve, balance valve, foot valve, adjusting valve, blow-down valve, plunger and strainer etc.
The qualification of Yuanda valve group:
The DNV ISO9001, ISO14001
The American Petroleum Institute(API6D)
The European Union(CE), GOST, KS and so on.
Yuanda group has built a solid cooperative relation with some multinational corporations like the Crane International Holding Inc. USA and Korea Dongjin Valves Inc. Our products have exported to Europe and America, Korea ,Russia, Pakistan, Kazakhstan, Saudi Arabia , Ukraine and so on.