Cat 6 UTP Keystone Jack

Specifications:Meet TIA/EIA-568-A and TIA/EIA-568-B Category 6 requirements.
Meet TIA/EIA TSB-40
Meet ISO/IEC Generic Cabling Standard 11801
Meet CENELEC Generic Cabling Standard EN50173
Angle: 90 Degree
Termination: 110&Krone Type
Electrical:
According to UL 1863
Current rating: 1.5 AMP Max.
Voltage rating: 150 Volts
Contact resistance: 20 m-ohm
Insulation Resistance: 500M-ohm
Dielectric Withstand Voltage: 1000 V AC RMS, 60Hz 1min
Materials:
Housing: PC UL94V-0
IDC: PC UL94V-0, Accept 22-26 AWG Solid Wire.
PCB: FR4 1.6mm(0.04") thickness, 2 layers
Contact: PC UL94V-0, 0.45mm(0.018") Diameter Phosphor bronze with 3 U" to 50 U" Gold plating on contact area
Technique Characteristics:
1.Housing and other plastic parts material: PC UL94V-0
2.8 Pin of the RJ45 jack:Phosphor bronze with golden plated 3U,6U,15U,30U,50Uoptional. Insertion dependability:750 times.
3.IDC Clips: Tinned phosphor bronze pins. Fitting for 22AWG/23AWG/24AWG Cables.Punching dependability: 250 times.
4.Punching tools: tooless type
5.Testing condition of transmitting capability: 100MHz/250HMz (for both CAT5e & CAT6)HousingPCUL94V-0PCB1.FR41.6mm(0.04")thickness.
2.4layers.Contact1.PCUl94V-0
2.Phosphorbronze:0.45mm(0.018")Diameter
3.Goldplating:3U"/0.0762um~50U"/1.27umElectrical1.AccordingtoUL1863.
2.Currentrating:1.5AmpMax.
3.Voltagerating:150Volts.
4.Contactresistance:20m-ohm.
5.InsulationResistance:500M-ohm.
6.DielectricWithstandVoltage:1000VACRMS,60Hz1min.OverallDiameter1.MeetTIA/EIA-568-AandTIA/EIA-568-BCategory5Erequirements.
2.MeetTIA/EIATSB-40.
3.MeetISO/IECGenericCablingStandard11801.
4.MeetCENELECGenericCablingStandardEN50173.PerformancePassFLUKEtest