Ce Approved Commercial Used Air to Water Heat Pump

CE Approved Commercial Used Air to Water Heat PumpFeatureThe heat pump system make up for deficiency of the solar system during cloudy and rainy daysSupports all day and all seasons workingExtremely compact structure: no copper pipe heat-exchanger in the water tankSuper high-efficiency with automatic defrosting functionIntelligent controller and adjustment by quick-mind microprocessor with possibility of remote controlThermostatic heating element for evaporator anti-frosting protectionGenerally cost less to operate than other types of conventional heating systems, save your electricity or gas bills.Operate at a high efficiency with no flames, fumes, or flues; Water and electricity isolated.With intelligent control systems which convenient and simple operationProvide hot water no matter in cloudy day, snowy day or at night, unlike solar collectors which have to be facing the sun. Water/geothermal source trinity heat pump is akind of high energy saving water heater and green products.Heat Pump Water Heater spec:ModelMDS100Dinput power when heatingKW9.2heating capacityKW36.8Input power when coolingKW8.7Cooling capacityKW26Water flow of cycle pumpL/h11000Max outlet water tempºC60rated voltageV380~460frequencyHz50phasethreeABC lineMm26N lineMm22.5currentA18pipe sizemm50net weightkg350gross weightkg360dimensionmm1030*685*720packing dimensionmm1100*765*883noisedb60compressorCopeland 2pcHot water side HECoil heat exchanger(copper)Source side HEplate HE/shell and tube HEAir condition side HEPlate HEcabinetSpray coatingWorking principle:
The working principle is Reverse Carnot Cycle, consists of compressor, condenser, expansion valve, evaporator. It has five working mode, 1,house heating only ;2,house cooling only ;3,hot water only; 4,house heating +hot water; 5,house cooling +hot water.Description of heat pump name:
Water source means the heat source is water, it can be river water, underground water, or other water, the water cycle is open loop. Geothermal source means the heat source is from Geothermy, normally bury pipe in the soil, and fill mixed liquid of water and glycol in the buried, so the water cycle is closed loop.Usage:
Users can use it to supply sanitary hot water, heating house and house cooling.Components description:
1. We mainly use Copeland scroll compressor, it's high efficiency, low noise, stable, and long lifetime.
2. We use two kinds of heat exchanger for source side, if the source side is clean water, we use plate heat exchanger, if water is not clean dirty, we use shell and tube heat exchanger
3. The heat pump can work automatically after the first time setting. It's easy and convenient to use.Water Source Heat Pump Controller functions:
1,Cooling running
2,Heating running
3,Show return water temperature of inner loop and preset temperature, with the inquiry functions
4,Automatic memory of the parameters if power fails.
5,The compressor runs balanced and start at different fixed time.
6,Short phase protection and inverse phase sequence protection of three-phase supply.
7,Perfect protection functions and displayed
8,Have fan coil linkage interface
9,Use for Motorola high-performance chips, to have the best AC noise interference reduction.
10,ON/OFF at definite time function
11,Payment reminder function.