CE Factory direct sales LRS-150-12 single output high quality dc 12v 150w power supply
150W Single Output Switching Power SupplyLRS-150 series
Features:
AC input range selectabl by switch
Withstand 300VAC surge input for 5seconds
Protections: Short circuit /Overload /Over voltage/ Over temperature
Cooling by free air convection
LED indicator for power on
100% full load burn-in test
High operating temperature up to 70ºC
High efficiency, long life and high reliability
2 years warranty
SPECIFICATION
OUTPUT
Model
LRS-150-12
LRS-150-15
LRS-150-24
LRS-150-36
LRS-150-48
DC Voltage
12V
15V
24V
36V
48V
Rated Current
12.5A
10A
6.5A
4.3A
3.3A
Current Range
0~12.5A
0~10A
0~6.5A
0~4.3A
0~3.3A
Rated Power
150W
150W
156W
154.8W
158.4W
Ripple &Noise
150mVp-p
150mVp-p
200mVp-p
200mVp-p
200mVp-p
Voltage Adj. Range
10.2~ 13.8V
13.5~18V
21.6~28.8V
32.4~39.6V
43.2~52.8V
Voltage Tolerance
±1.0%
±1.0%
±1.0%
±1.0%
±1.0%
Line Regulation
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
Load Regulation
±0.5%
±0.5%
±0.5%
±0.5%
±0.5%
Setup, Rise Time
500ms, 30ms/230VAC500ms, 30ms/115VAC at full load
Hold Up Time
40ms/230VAC35ms/115VAC at full load
INPUT
Voltage Range
85 ~132VAC /170 ~264VAC240 ~370VDC(switch on 230VAC)
Frequency Range
47 ~63Hz
Efficiency
87.5%
88.5%
89%
89%
90%
AC Current
2.8A/115VAC1.6A/230VAC
Inrush Current
Cold start 60A/230VAC
Leakage Current
<0.75mA /240VAC
PROTECTION
Over Load
110 ~140% rated output power
Protection type: Hiccup mode, recovers automatically after fault condition is removed
Over Voltage
13.8 ~16.2V
18.75~21.75V
28.8 ~33.6V
41.4~48.6V
55.2~ 64.8V
Protection type: shut down o/p voltage, re-power on to recover
ENVIRONMENT
Working Temp.
-30 ~+70ºC (Refer to "derating curve")
Working Humidity
20 ~90% RH non-condensing
Storage Temp., Humidity
-40 ~+85ºC, 10 ~95% RH
Temp. Coefficient
±0.03%/ºC (0 ~50ºC)
Vibration
10 ~500Hz, 5G 10min./1cycle, 60min. each along X, Y, Zaxes
SAFETY &EMC
Safety Standards
UL60950-1, TUV EN60950-1, EN60335-1/-2-16, CCC GB4943 approved
Withstand Voltage
I/P-O/P:3.75KVACI/P-FG:2KVACO/P-FG:1.25KVAC
Isolation Resistance
I/P-O/P, I/P-FG, O/P-FG:100M Ohms /500VDC /25ºC /70% RH
EMC Emission
Compliance to EN55022(CISPR22), GB9254 CLASS B, EN55014 EN61000-3-2,-3 class A, EN61000-3-3
EMC Immunity
Compliance to EN61000-4-2,3,4,5,6,8,11, EN61000-6-2(EN50082-2), heavy industry level, criteria A
OTHERS
Dimension
159*97*30mm (L*W*H)
Weight
0.48Kg
Packing
30pcs/carton/15.4kg/0.75CUFT
NOTE
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature.
2. Ripple &noise are measured at 20MHz of bandwidth by using a12" twisted pair-wire terminated with a0.1uf &47uf parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation.
4. Line regulation is measured from low line to high line at rated load.
5. Load regulation is measured from 0% to 100% rated load.
6. The power supply is considered acomponent which will be installed into afinal equipment. The final equipment must be re-confirmed that it still meets EMC directives.
7. Length of set up time is measured at cold first start. Turning ON/OFF the power supply very quickly may lead to increase of the set up time.
>>Service
1.Low MOQ: It can meet your promotional business very well
2.OEM/ODM Accepted: We can produce any your design
3.Good Service: We treat clients as friend
4.Good Quality: We have strict quality control system. Good reputation in the market
5.Fast &Cheap Delivery: We have big discount from forwarder (Long contract)
6.Professional Service: From inquiry ->make sample ->start order ->inspecation ->delivery
>>Contacting