Center Heights 80, 100, 125, 160mm, Semi-Universal Dividing Heads

The models SUDH80, SUDH100, SUDH125, SUDH160 semi-universal dividing heads respectively have the center height as 80mm, 100mm, 125mm, 160mm and are the most important attachments for milling machines. With the help of these dividing heads, direct indexing and simple indexing can be performed on the workpiece and the workpiece and be rotated to any angles as desired.The operation handle of model SUDH80 is set on the left, and the operation handles of SUDH100, SUDH125, SUDH160 are set on the right.SpecificationsSUDH80SUDH100SUDH125SUDH160Center height, mm80100125160Swivel angle of spindle from its horizontal position (upward), Deg≤90≤90Swivel angle of spindle from its horizontal position (downward), Deg≤6≤5Rotating angle of spindle responding to one revolution of handle, Deg9 (540 grad., 1 each)Min. reading of vernier, Sec10Worm gear ratio1:40Taper of spindle boreMT3MT4Width of positioning key, mm1418Diameter of short taper of spindle nose for mounting flange, mm36.54141.27553.97553.975Number of holes on indexing plate1st plate24, 25, 28, 30, 34, 37, 38, 39, 41, 42, 432nd plate46, 47, 49, 51, 53, 54, 57, 58, 59, 62, 66Individual indexing error of the spindle for one revolution of handle, Sec60±45Cumulated error at any 1/4 periphery of spindle, Min70±1Max. load capacity, Kgf80100130130Net weight, Kgs265783.5100Gross weight, Kgs326996114Packing size (LXWXH), cm48X36X2261X46X2654X46X3171X50x34