Chemical Equipment Lab Furniture Ductless Fume Hood

Fume hood is the most commonly used exhaust equipment in the laboratory for the part area air ventilate, it is many
variety, due to the different structure, use condition is different, the ventilation effect is not the same. The performance
of the fume hood, mainly depends on the speed of the moving the air of the fume hood.
Laboratory ventilation is an indispensable part of in the design of laboratory. In order to make the laboratory staff don't
inhale or pharynx into some unknown toxic and can cause or toxicity of chemicals and organisms, the laboratory should
have good ventilation. To prevent some of the steam, gas and particles (smoke, soot, dust and air suspension)
absorption of pollutants must be used fume hoods and ventilation hood or local ventilation method to remove.Item NameFume HoodSize:1800*850*2350mm or customized sizeTypes:Bench-top Fume Hood ;Walk-In Fume Hood;PP FumeHood;SSFume Hood; Steel Fume HoodLining :Chemical&HeatResistant,FireRetardant,SmoothFinish,Easilycleanablepanelsmade ofdurable
phenolicintegralworkwalls(5mmthick)Sash Openning0-800 mm.Average face velocity:0.5m/sFront Top Panel:Easilyopenablehingedtoppanelforeasyaccessto
FlowControlValveandElectricalLightingfixturesformaintenance.Work Top :12.7mmphenolictopwithdoublethickededges,15mm epoxy
resinworktop,30mm ceramic worktop ,30mm granite worktopWindows Glass :5mm toughened glassLight:20W x1 ,at least 400 LUXExhaust duct:glass steel tube of PVC tube ,corrosion resistancebase :SS304Socket:1.5amp switch with three socketsTechnical data:noise ≤ 60 dB (international) :wind speed three-section exhaust