China Multi-Functional Lab Pharmaceutical Machinery Tester

U&M-II Multi-Functional Lab Pharmaceutical Machinery Tester (R&D)

Accessories:
Products Information:

Main drive unit provides touch screen control and PLC control system that makes control more simple and convenient.

Accessory Devices are made of 316L stainless steel and all items totally meet GMP standard.

Technical parameters:

ModelU&M-IIPower220V/0.557KWDimension580x500x600Weight 50KgRotating Speed0-120r/min

Accessories
1. Double cone Mixer
Double cone Mixer is used for all free-flowing powder and granules. In the course of the campaign,
it can quickly produce multi-dimensional movement and purpose to achieve a perfect mix.
2. Cubic Mixer
Mixer using three-dimensional rolling action to produce uniform blending, mixing action extreme moderate, the device particularly suitable for sensitive and strong materials. Gear in general, can be 0 ~ 75 ° angle for any arbitrary adjustment to increase or decrease the intensity of mixing action. With the strategic side cloth body was three rows of stainless steel rods to supplement the mixing of materials.
3. Agitator
Agitator can mix all kinds of liquid with high and low viscosity. The stirring is finished by artificiality the container and stirrer mixer are both made of stainless steel.
4. Oscillating Granulator
Oscillating Granulator adopts rocking and rotating granular solids to make granular solids pass the desired mesh belt, with its max productivity of 30 kg/h, which depends on the materials and the meshes of two different sizes.
5. Trough Mixer
Trough mixer adopts a
Z-chip to rotate in the groove container in different angles. It is made of stainless steel, with the different speed and the outline of stainless chip, it mixes materials very well. The whole container can rotate at a 180 degree after cutting off the power, so it is easy to discharge and to be cleaned.
6.V-Mixer
It consists of two cylinders made into asymmetrical, so that the materials produced by the
reciprocating motion of the severity of impact, ran the purpose to achieve uniform mixing, with no dead ends, no accumulation of material, speed and so on.
7. Coating Ball
Coating ball adopts a linking gear to connect all kinds of coating balls and the driving main engine, facilitating operators to produce coating materials uniformly in a correct angle. It is possible to equip with an electric air heater with a fixed pole above the ball, to drying promptly.
8. Oscillating Sifter
When rocking, it forces the granular solids to be screened by mesh, so you can choose the desired materials of mesh standard. There are screens of two sizes.<o:p>
9. Single cone Mixer

Single cone Mixer is used for all free-flowing powder and granules. In the course of the campaign, it can quickly produce multi-dimensional movement and purpose to achieve a perfect mix. The device are made of 316L stainless steel.
10.Multi-directional Movement Mixer

A ball barrel is bind symmetrically on the rotated frame, which is made of stainless steel, making the materials to be processed rotate as it and do three-dimensional motion, so as to rock-over and mix the materials.This machine is applicable for 5-10 liters. The ball barrel can be purchased as a supplement.
Key parts and components list:

NONAMEMODELQtyMANUFACTURER 1Variable frequency motorVFG7124-50-0.37KW-B51SHAGNHAI FUTIAN2ReducerNMRV050/15-71B51SHANGHAI JINGGENG3PLCFX1S-10MR1MITSUBISHI 4ModuleFXIN-1DA-BD1VV MITSUBISHI 5TransducerFR-0720S-0.4K-CHT1MITSUBISHI 6CableFXO-50DU-CABO1MITSUBISHI 7Man-machine interfaceMT6050i1MITSUBISHI 8Circular connectorXS12K4P1SHAGNHAI MINGDE9Floor switchEKW-5A-B1SHANGHAI MINGDE 10Key switchZB2BZ101C
Schneider1SCHNEIDER 11Scram switchZB2BS54C1SCHNEIDER 12BreakerDZ47-63/2P 10A1CHNT13Fuse baseRT18-32X 3A1ZHENGRONG14Binging postTD15-201ICT ELECTRICAL15Power lineY#-A 15A250V1ZHEJIANG HUAYIN INSTRUMENT&ELECTRICAL16Axial fluidization blower120*120 1SUNON17worm speed reducerWJK50151TONGYU