China Pneumatic Brad Nailer for Construction Decoration Furnituring

(F50) Pneumatic Brad Nailer

Product Description:

Name:Brad Nailer F50Weight :1.49kgs (3.28 lbs)Load Capacity :100PCS Operating Pressure :5~7Kg/cm (75~100Psi)Fasteners Length :10mm-50mm Fasteners Size:1.25mm x 1.05mmTool Diamensions:225x60x220mm (8.86x2.36x8.66 in.)Usage :Furnituring, Construction...Customized:Customized is available if you provide a drawing or sampleOEM Service:Available

Features:
"Contact mode" safety system
Light die cast body of aluminum alloy
Traditional quick release design
Side loading system
Remain nail display available
Advantage:

1. 500000 working times

2. 100% Spare parts can be supplied to you.

3. Very powerful for hard wood

Usage:
Furnituring, Construction and so on
Service and Repars:

No. SymptomProblemsSolutions1.1Air Leak Air leak in the cylinder cap when tools don't work 1.Loose head valve piston seal or o-rings .Check and replace the head valve piston set2.Worn or damaged o-ring or cylinder cap gasket under cylinder cap Check and replace o-ring or cylinder cap gasket under the cylinder cap1.2Air leak in Trigger area when tools don't work1.Damaged o-ring in trigger valve Check and replace o-ring2.Damaged o-ring in trigger valve stem Check and replace o-ring3.Dirt in the trigger valveCheck and clean the trigger valve1.3Air leak in cylinder cap when tools are working 1.Damaged head valve piston o-ringsCheck and replace o-rings2.Damaged seal under cylinder cap Check and replace seal1.4Air leak in nose when tools are working 1.Worn or damaged bumperCheck and replace bumper2.Loose driver(piston unit) threadCheck and replace driver(piston unit) 1.5Air leak in Trigger area when tools are working1.Worn or damaged trigger valve headCheck and replace trigger valve head2.Damaged head valve piston o-ringsCheck and replace head valve piston o-rings2Failed to get driver(piston unit) back to the correct position completely.1.The driver(piston unit) is not straight or the driver guide(nose) is wrong assembled.Straighten the driver(piston unit) or verify driver guide(nose) and magazine 2.Worn or damaged nozzle Check and replace nozzle 3.The space between piston o-ring and cylinder is too tight.Check if the cylinder is adequate lubrication or replace the o-ring on the piston.3Work weakly and sluggishly1. Worn or damaged piston o-ring Check and replace piston o-ring 2.Inadequate lubrication for head valve piston o-rings or too tight head valve piston o-rings Place 2 or 6 drops of oil on o-rings or replace head valve piston o-rings3.Dirt in the nozzleCheck and clean the nozzle4Tool jams frequently1.Damaged or Worn driver (piston unit)Check and replace driver (piston unit)2.Damaged or Worn driver guide (nose)Check and replace driver guide (nose)3.Driver guide cover is bent,so the space between driver guide cover and driver guide is too bigCheck and replace driver guide cover 5Nail can not be shot1. Driver (piston unit) can't return to the correct position.Refer to no. 1 Symptom2.Driver guide(nose) can not match magazine wellCheck and correct the position between driver guide(nose) and magazine 3.Worn or damaged nail pusher compression spring Check and replace nail pusher compression spring

Company Information:
FAQ:
1.Q:Do you have your own production factory?
A:Yes,we not only have our own factory,We also have a cooperative relationship with more than one hundred factories in China
2.Q: Can you send us samples?
A: We are pleased to send you the sample to test the quality and market.

3.Q: about your products, could you do it OEM?
A: Yes, OEM service is available.

4.Q: Do you also provide spare parts of pneumatic tools?
A: once we confirm the models you'd like to order, we will send you the diagram for checking and also suggest you some easy-broken parts.

5.Q: For the product, could you spray other color of painting?
A: Yes, color can be customized.

6.Q: What's the delivery time?
A: It usually takes about 20-30 working days to produce one order.

7.Q: How is the payment terms?
A: Normally T/T 30% in advance and T/T 70% before shipment.

8.Q: Can I mix different models in one container?
A: Yes, different models can be mixed in one container, but the quantity of each model should not be less than MOQ.

9.Q: How does your factory do regarding quality control?
A: We always pay great attention to quality control from the very beginning and every product was tested piece by piece before delivery.

10.Q: Do you have quality certification?
A: Yes, we have CE, SGS,ISO, ect.
Main Products:
Why choose KYA?
1.Short production time:Our company have established the strong partner-ship with over 100 factories and We have our own factory.

2. No business too small The most abundant models can be found here and we can share you with advanced and accurate information and resource.
3.Reasonable prices and High quality:Quality and prices are our focus because we know what you will care at most.
4.Satisfactory after-sales service: Middle time production report with photos will be sent to you and also reconfirm accomplished date. We will establish close contact with you.Any problem you will get reply at the first time.

5.Free samples: Free samples available at any time.
You can get competitive prices from us because we possess big manufacturing relationship in China.

Contact Us: