China Series Grinding Granulating Machine Co-Mill

(FZ)Series Grinding and Granulating Machine/Co-Mill

Parts of the machine:
Photos of finished products:
General Description:

FZ Series grinding and granulating machine is used in pharmaceutical, food, fine chemical processing industries. This machine reaches the world advanced level and conforms to the GMP specification. It is completely made of stainless steel material.

Application:

Pharmacy:
1. Grinding of raw material
2. Granulating of wet material
3. Granulating of dry material
4. Unqualified tablets to be recycled can be granulated according to the
requirements of granularity

Food: Grinding of biscuit for recycling

Others: Grinding and granulating of rough raw material
Grinding and granulating of lump raw material

Features:

1. Thoroughly solving the tough problem of material contaminated by the debris of worn sieve mesh in a pendulum-type granulating machine
2. The unique patented shaft sealing technology ensures no leakage of lubrication oil.
3. No retention dead corner, no material overheating.
4. Less dust, no vibration, low noise.
5. High efficiency, energy saving, large production capacity
6. Attractive appearance, easy to clean
7. The motor is sealed. The cooled air of the motor suck and discharge through the respirator in order to prevent the environmental pollution
8. The part which keep in touch with the material , such as hopper, pulverizing chambers, pulverizing knife, sieve mesh, discharge barrel and moving ring of the bearing set, can be dismantled a, washed and disinfected.
9. This "A" type machine apply to the work requirements of 100-grade workshop

Working Principle:

The material to be processed enters into the feed inlet of grinding and granulating machine, droops into the conical sieve chamber. The rotary knife plays a whirling action to the material, and throws the granules to the sieve mesh surface by centrifugal force. The granulates are ground into particles by the shearing action produced by the rotary knife and the sieve mesh, and discharged through the sieve apertures, the size of ground particles can be adjusted by the sieve mesh number, the gap between rotary knife and sieve mesh, and the rotary speed.
Technical Parameters:

Model FZ-150FZ-300FZ-450FZ-700FZ-1000Capacity15-150 kg/h30-300 kg/h45-450 kg/h70-700 kg/h100-1000 kg/hGranularity6-80 meshDrive seat temperature rise< 30(ºC)Range of speed regulation300~3600 rpm(Frequency Control)Motor power 1.5 kw1.5 kw2.2 kw3.0 kw5.5Overall dimension720 * 445 *1345810 * 445 * 1345920 * 445* 14301000 * 500 * 15301100*600*1875The height from
ground to discharge mouth 650 mm650 mm690 mm690 mm700 mm