China *Sk-1400A Infrared Imager for Industrial Troubleshooting with Industrial Thermometerinfrared Thermometer

It combines the advantages of traditional infrared camera and infrared thermometer.
The thermal imager is compact and durable, with auto focus
Distance factor ratio up to 390:1
Automatic operation through automatic tracking hotspot function
Temperature information can be collected and analyzed in a wide range of target areas
Thermal imaging eliminates the trouble of hot spots and cumbersome positioning required for single-point temperature sensors. Integrated point tracking function will identify cold/hot spots in the image

Detection device: FPA, uncooled (17 µm pitch)Optical resolution:382 x 288 pixelsSpectral range:7.5-13 µmTemperature range:
-20 °C to 100 °C
0 °C to 250 °C
(20) 150 °C...900 °C 1)frame rate: 80 Hz / 27 HzOptical resolution:
18° x 14° (f = 20)
29° x 22° (f = 12.7)
53° x 38° (f = 7.7)
80° x 54° (f = 5.7)Focusing: manual focusingDistance coefficient ratio: 390:1 (18° optical resolution)Thermal sensitivity (NETD):80 mKAccuracy:±2°C or ±2%, whichever is higherPC interface: USB 2.0/Ethernet (100 Mbit/s)/PoE/RS485 2)Direct output/input:
1x analog output (0/4-20 mA)/1x input (analog or digital); optically isolatedProcess Interface (PIF):
3x analog output (0/4-20 mA or 0-10 V) or alarm release (relay)/
3x input (analog or digital)/fail safe (LED and relay);
Stackable 3 PIF; optically isolatedAmbient temperature (TAmb): 0 °C to 50 °CHousing (dimensions/rating):36 mm x 90 mm (M30x1 thread)/IP 67 (NEMA 4)Weight: 200 gShock 3): IEC 60068-2-27 (25 G and 50 G)Vibration 3):
• IEC 60068-2-6 (sinusoidal waveform)
• IEC 60068-2-64 (broadband noise)Tripod: 1/4-20 UNCcable length:
USB: 1m (standard), 3m, 5m, 10m and 20m
Ethernet/RS485: 100 mPower supply: USB/PoE/5-30 VDC

Q: Can the product be used outdoors?
Answer: No, the measurement environment of the thermal imaging camera must not be interfered by external factors, such as outdoor air temperature, sunlight exposure to the instrument or the human body, will cause unstable temperature
Q: Can the thermal imager monitor a group of people at the same time?
Answer: Yes, but it is necessary to ensure that the people behind are not blocked by the people in front.
And people must keep facing the thermal imager, so that the data captured by the thermal imager is the most accurate
Q: Is the large area of the human face covered, will it affect the accuracy of the temperature measurement data of the thermal imager?
Answer: As long as the human forehead is completely exposed, the problem is not big, because the calibration of the forehead data is an effective method to measure the standard temperature of the human body!
Q: There are a lot of heat source interference in the on-site environment, will this affect the data of the thermal imager?
A: It will affect, but our products have a shielding function, shield some fixed heat sources, or just capture the face, not the non-human heat source!
At present,we have cooperative production relations with many domestic companies.we can undertake customized OEMproducts.