China 0-10V 100W LED Driver 0-10V 100W LED Driver CV 0-10V 100W LED Driver 12V 24V 36V 48V

0-10V 100W led driver CV 12V 24V 36V 48V for led strip
1. 0-10V 100W led driverFeatures:The output mode:Constant voltTest Instrument age;Design:Noise free & flicker;Technology:Using active built-in PFC technology;Effiency:>90%;Power factor>0.95;Protection:Short Circuit Protection / Over Voltage Protection;Waterproof ProtectionAluminum silicone gel potted waterproof IP67 protection;Dimming mode0/1-10V/PWM/potentiometer(3 in 1 dimming);Input voltage:Full input voltage 90-265V AC;Certificates:CE/ROHS/ETL/SAA/TUV passed.
2. Specifications of 0-10V 100W led driver
(1)Basic parametersModelVGD-0/10V-CV-100WOutput Voltage12V / 24V / 36VVoltage Precision±0.5VOutput Current8.34A / 4.2A / 2.7AOutput Power100W(Max)Line Regulation1%Input Voltage Range100-277V/AC(standard) 85VAC(min)305V/AC(max)AC Current(Typ)0.71A@100VAC 0.62A@110VAC 0.32A@220VAC 0.26A@264VACFrequency Range50/60HzPFC(Typ)>0.95@full loadFull-loading Efficiency>90%
(2)Protection of 0-10V 100W led driverShort CircuitShort circuit protection / Over voltage protectionOver Voltage<305VAC
(3)Environment of0-10V 100W led driverOperation Temperature-40~+50 ºCOperation Humidity20~90%Storage-40~ +85 ºC, 10~95%RHTemperature Coefficient±0.03%/ ºC (-45~50 ºC )Vibration Resistance10~500HZ,2G 10Min/period,X , Y , Z line per 60 mins
(4)Safety&EMCof0-10V 100W led driverStLED Video Processor andardRefer to EN 61347-1;EN 61347-2-13; EN 62493Withstand VoltageI/P-O/P:3.75KVACInsulating StrengthI/P-O/P:400M Ω/500 VDC/25 ºC /70%RHEMC EmissionTo Correspond EN55015,EN61000-3-2( >= 50% load)EMC ImmunityTHand Tools o Correspomd EN55015,EX61000-4-2,3,4,5,6,8,11,A Level of light industry standard(Surge 4KV)
(5) Other information of0-10V 100W led driverWeight700GDimeHydraulic Press nsion250*44*32mm ( L*W*H)PCB94V-0 PC fire retardantColorBlackPacking31*17*18cm/20pcs
(6) Note
All parameters are measured at normal temperture(25-28 ºC )
1. Ripple & Noise are measured at 20KHz of bandwidth by using a 12" twisted pair-wire teminated with a 0.1 uf & 47uf parallel capacitor(@ full load).2.The efficiency measured at Max output voltage,and 230VAC with full load,if with 110VAC the efficiency will be lowered 0.5%~1.5%;Working 1~2 hours,efficiency will be hiLock gher 1.5%~1%than the initial stage.3.Mechanical Specificationof0-10V 100W led driver
4.Power Factor & Efficiency & Load of (110VAC / 230VAC)0-10V 100W led driver
5.Wiring diagramof0-10v dimming led driver
6. Certificates of 0-10V dimming led driver

7. The picture of production line
8. The application of LED drivers
Welcome your visiting to our factory.