China 1+2 Fully Automatic Mask Machine Face Mask Making Machine

This is a semi-automatic mask machine. Note: (this machine was originally a full-automatic line, only considering that there are no professional mask production technicians in the manufacturers that purchasing the mask production line at present, and the specification deviation of the current incoming materials is large, resulting in the starting rate of full-automatic line generally ≤ 50.
As a result, huge capacity loss and waste of raw materials are caused, so we replaced the most likely failure link in the middle with manual operation, only two more operators than the full-automatic line
(5 people in total), and 24-hour full capacity can reach 120000 per day, after the epidemic situation,
only need to increase 12000 yuan can be changed back to the full-automatic line, can achieve 80000 per day production capacity! Using this compromise scheme to make semi-automatic lines, the debugging threshold is reduced, and users can only go through two days of training or video learning to debug independently, thus alleviating the serious shortage of our current debugging personnel. It is stated here that the expenses required to restore the automatic line later shall be deemed as the contract commitment

Wr120-2 outer ear mask machine can only produce disposable flat masks, not three-dimensional or N95 masks. Whether the masks produced by this machine are medical is not related to the machine. As long as the masks are sterilized, the masks produced by this machine can be used as surgical masks. Common medical masks:It is mainly composed of three layers of non-woven fabric. The inner layer is ordinary non-woven fabric; the outer layer is non-woven fabric with waterproof treatment, which is mainly used to isolate the liquid ejected by patients; the middle filter layer is polypropylene melt blown non-woven fabric with electret treatment; After the production is finally completed, it should be sterilized with ethylene oxide and allowed to stand still for 7 days to volatilize toxicity. After that, it should be sealed and packed and transported away. machine floor size:
8500(L)x3500(W)x1800(H)m/m
2,Mechanical characteristics:
1. Automatic tension control of raw materials to ensure the balance of tension of raw materials.
2. Computer program control, high output, good stability, low error rate.
3. Photoelectric detection of raw materials to avoid mistakes and reduce waste.
4. Can produce one to four layers of mask body
5. This machine has the function of total count and batch count. The number of batch count can be set arbitrarily.
6. Changing the mold can produce different sizes and styles of masks.