China 1.25 Liter 1.5 Liter Plastic Carbonated Drink Bottle Blow Molding Machine

1.25 Liter,1.5 Liter Plastic carbonated drink bottle Blow Molding Machine
ZQ-B series full-automatic pet stretch blow molding machine is the most stable two-step automatic stretch blow moulding machine. It has one to two cavities and the maximum capacity of the products is 0.6L and 2.0L. It can blow bottles in shapes: Carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers, which is made of plastic of crystalline type, such as PET and PP etc.
1.25 Liter,1.5 Liter Plastic carbonated drink bottle Blow Molding Machine,advantages.
1). High Automatization
2). High Intelligence: The machine can be controlled through touch screen and running status is shown on it.
3). High Quanlity: Steady infrared heating system blowing and highly precise blow-mould closing system ensure quality.
4). High Speed: 2700BPH(2-cavity) 5600BPH(6-cavity).
5). No Contamination: Closed production zone, good self-lubrication system avoid contamination.
6). Low Cost: Low consumption of electricity, air and water.
7). High Transparency: Easy maintenance, absolute safely, visual inspection, low noise.
Settings
A). PLC colour display: OMRON(Japan)
B). Pneumatic parts: FESTO(Germany)
C). Controller of preform transfer: Servo motor DELTA(Taiwan)
D). Other electric parts are all world-famous brand
Features
A. Stable performance with advanced PLC.
B. Conveying preforms automatically with conveyor.
C. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
D. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
E. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
F. No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
G. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
H. Strong clamping force with high pressure and double crank links to lock the mold.
I. Two ways of operating: Automatic and manual.
J. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
K. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
L. Contamination is avoided for the bottle body.
M. Ideal effect of the chilling with the chilling system.
N. Easy installation and starting
O. Low rejection rate: Less than 0.2 percent.
1.25 Liter,1.5 Liter Plastic carbonated drink bottle Blow Molding Machine,equipment information.

TYPEITEMZQ-B1500-2ZQ-B1500-3ZQ-B1500-4ZQ-B1500-6CONTAINERNumber of cavity2 cavities3 cavities4 cavities6 cavitiesOutput2400-2600 pcs/hr2800-3300 pcs/hr3800-4200 pcs/hr5500-6000 pcs/hrMax.container volume2.0L2.0L2.0L2.0LMax.neck diameter38mm38mm38mm38mmMax.container diameter105mm105mm105mm105mmMax.container height300-330mm300-330mm300-330mm300-330mmELECTRICAL SYSTEMNumber of lamp27pcs36pcs60pcs90pcsMax.heating power27kw36kw60kw90kwInstallation power38kw48kw65kw96kwActual power consumption18kw22kw40kw60-70kwAIR SYSTEMOperatating pressure7-9kg/cm²7-9kg/cm²7-9kg/cm²7-9kg/cm²Low pressure consuming1200Ltr/min1400Ltr/min2000Ltr/min3000Ltr/minBlowing pressure25-35kg/cm²25-35kg/cm²25-35kg/cm²25-35kg/cm²High pressure consuming2000-2500 Ltr/min2000-3000 Ltr/min3000-3500 Ltr/min4500-5000 Ltr/minCHILLER WATEROperating pressure5-6 kg/cm²5-6 kg/cm²5-6 kg/cm²5-6 kg/cm²Temperatuer10ºC10ºC10ºC10ºCConsuming5600kcal/hr7600kcal/hr19000 kcal/hr25200 kcal/hrFlow rater30Ltr/min45Ltr/min60Ltr/min200Ltr/minMACHINEMachine dimension3.25x1.5x2.1(m)4.5x2.1x2.1(m)4.7x2.1x2.1(m)7.3x2.2x2.1(m)Machine weight3.1ton3.9ton4.1ton6.35ton

Note: The specifications are subject to change without notice for the further improvement.
Note: Custom production accepted. Any client idea tried.