China 1 4"And1 2"PVDF Venturi Injector for Ozone Generator Machine Parts

A Venturi Injector can be used with any of our products to create a vacuum effect during ozone application. The injector can be paired with any of our generators, but is needed specifically for the SP and Aquatic units. For the use of this venturi, it is recommended to use a 1.5" PVC pipe. This vacuum allows for any additive material to be drawn through the suction port and mix during the application process. This process combines two different substances to create a fluid mix of the two, then releases the combined products through the outlet side.

Note: Injectors are nonreturnable.

Specifications
Material:PVD
Water flow rate:0.05-0.25 T/Hr
Specification:Inlet & Outlet diameter 1/5' external screw threadValve bonnet of Gas Inlet is 1/8';flexible hoseLength: 57 mm
Material:PVDF
Water flow rate: 0.1-1 T/Hr
Specification:Inlet & Outlet diameter 1/2' external screw threadValve bonnet of Gas Inlet is 1/4';flexible hose is 1/4Length: 100 mmMaterial: PVDF
Water flow rate:3-10 T/Hr
Specification:Inlet & Outlet diameter 1' external screw thread.Valve bonnet of Gas Inlet is 1/2';flexible hose is 1/8Length: 230 mmMaterial: PVDF
Water flow rate: 1~3 T/Hr
Specification:Inlet & Outlet diameter3/4' external screw threadValve bonnet of Gas Inlet is 1/4'; flexible hose is 1/4'Length: 152 mmMaterial: PVDF
Water flow rate:10~25 T/Hr
Specification:Inlet & Outlet diameter 1.5' screw threadValve bonnet of Gas Inlet is 1/2'; flexible hose is 1/2'Length: 275mmMaterial: PVDF
Water flow rate: 25~50T/Hr
Specification:Inlet & Outlet diameter 2' screw threadValve bonnet of Gas Inlet is 1.25'; flexible hose is 1/2Length: 295mm