This machine is designed to make bevel on small glass and big glass. The front beam can be moved up and down according to glass size. For small glass size, the front beam can be moved down. For big glass size, the front can be moved up.
Control: This machine adopt PLC control and operator interface. The Screen can show glass thickness, bevel angle, bevel width and front beam height.
basement and frame: Heavy Duty made of cast iron to ensure stability and solidity.
Conveyor: Conveyors use chain-transmitting system, which consist of anti-friction rubber griping pads with reinforced sheet steel bone. This structure guarantee glass is stably moved. The working precision is high.
Motor: Use high precision vibration ABB motor, specially designed for beveling machine and contactor will be Schneider or Siemens .
Loading/offloading conveyor: Adopt heavy-duty timing belt.
Front rail movement: Motorized, it can move in parallel to adapt to different glass thickness. There is mechanical thickness readout to show conveyor opening.
Glass support frame: Use aluminum bar with yellow roll.
Lubrication: The machine equipped a manual lubrication pump, which lubricate the conveyor.
Working speed adjustment: through speed regulator, manually.
Amperometer meter: check the wheel assportion
Spindle10 SpindleSpeed 0m-6.0 m/minMax. bevel width 40mmBevel angle 0° -45°Min. glass size15mmX15mmGlass thickness 3mm-19mmTotal power24.2KWTotal dimension 6.6mX1.3mX2.6mWeight4500kgs