China 1000Mbps with G. hn Powerline Ethernet Adapter for Industrial Communication switch

DIN Rail Industrial PLC Ethernet Bridge is a powerline telecommunication product which being developed by WonderTek Technology (KunShan) Co.,LTD., it supports the G.hn protocol and the actual bandwidth up to 400Mbps. The product has been widely used in many aspect just as railway, mines, industrial telecommunication and metro etc..

1.1.1 Technical parameters
l Support G.hn.
l Industrial DIN rail style installation
l Actual bandwidth up to 400Mbps
l The maximum transfer distance up to 1000 meters
l Self-adapt the rate
l Compatible with all G.hn devices
l One Domain Master can manage 15pcs End Point.
l There can be 16 groups(16 different Domain Master) of PLC telecommunication devices in the same power line circuit
1.1.2 Manageability
l Support Remote Firmware update(TR069)
l 802.3D Ethernet Bridge.
l 802.1Q VLAN.
l Quality of Service(QoS) .
l IGMO(IPv4)Snooping&MLD(IPv6)Snooping
l Support local web management
1.1.3Operating environment
l Working temperature: -40ºC-80ºC.
l Operating humidity: 10%-85% no condense
l Storage humidity:5%-90% no condense
1.1.4 Design standards
l ITU-T G.9960
l IEC 60529
l IEC 50022
l IEC 60068-2-6
l MIL-STD-810G

Model

WD-1000M-DIN(S/T/V)

WD-1000M-DIN(D)

Interface

1*LAN 10/100/1000base-TX self adaption RJ45,1*AC power interface MDI/MDX support

1*LAN 10/100/1000base-TX self adaption RJ45,1*DC power interface MDI/MDX support

LED display light

Ethernet, PLC link ,power

Transfer band

25,50 and 100MHz and MIMO (based on G.9963)

Protocol(PHY)

IEEE802.3,IEEE802.3x, IEEE802.3uG.Hn

Security

128-AES

Transfer rate(PHY)

800Mbps

Modulation

OFDM

Effective transfer rate

TCP/IP 400Mbps

Manageability

Remote Firmware update,support TR-069(optional)

802.1D Ethernet Bridge

802.1Q VLAN

Quality of Service(QoS)

IGMO(IPv4)Snooping&MLD(IPv6)Snooping

Working voltage

AC 90V-520V

18-75VDC
100V-700VDC

Operating temperature

-40ºC-80ºC

Size

67*160*123 (mm)(LxWxH)

Weight

0.35kg

0.30kg

Operating environment

Operating humidity:10%-85% (no condense)

Storage humidity: 5%-90%(no condense)

Certification

FCC,CE class B,WEEE,RoHS

(1) Packet loss:≤0.1%(100M,load 70%);
(2) Support 7*24 hours all weather operation;
(3) hardware watch dog function;
(4) PING≤2MS;
(5) The quantity of the group ≤16pcs.

The testing voltage which the device should be beared: ±6kV direct Discharge, ±8kV air discharge;
Discharge number in Each sensitive testing point: Plus-n-Minus 10 times each;
Every time the discharge interval is 1 s.
According to B/T 17626.2-2006.

The testing voltage which the device should be beared:
between the power supply voltage port and ground: ±2.0kV;
between signal circuit and ground: ±1.0kV;
repetition frequency: 5KHz;
test duration: 1 min/ time;
testing times: Plus-n-Minus 5 times each.
According to GB/T 17626.4-2008.

The testing voltage which the device should be beared: ±2kV;
the interval of continuous impulses: 1min/time;
Test number: Plus-n-Minus 5 times each.
According to GB/T 17626.5-2008.(protection: all models protection and varistor series of discharge tube type)

Meet the demand of MX3 in TB1433(0-200Hz,2g acceleration, maximum amplitude 7mm), interface with no loose, device with no Sealing off and drop in the test.

WD-1000M-DIN(S)

WD-1000M-DIN(T)

WD-1000M-DIN(V)

WD-1000M-DIN(D)